Cheers Bannisdale, its good to hear positive feedback and results. Any mods needed to the BD sump guard or just a straight fit?
I picked up the latest batch today, those who ordered.. I'll post tomorrow.<!-- google_ad_section_end -->
Just fitted my SS bracket great product and very easy to fit Thanks for making it charlie PS Are you thinking of making anymore products for the 950
Hi, Do you have those SE relocaters still in warehouse ? I need two for me and my friend to here in Finland. Pete
Have to add Charlie worked with me to get the sidestand to me prior to my trip. Comments: Part is HEAVY and by that I mean that is a good deal. It's stout and should fend of any offenders that want to take a whack at that sidestand area. It fitted up 'PERFECTLY' even with the tighter tolerances that you've spec'd. One comment to those mounting it up. Be sure to get the lower front bolt through the side stand bracket troqued to spec prior to bolting the mount plate up on the bike itself. There is no room to tighten the nyloc nut supplied due to lack of clearance on the casting for the stand. This isn't a problem nor a oversight on Charlie's part just the circumstances of the new superior strength nuts/bolts supplied. BTW I have a Slaven's Racing Skid plate and there were no issues fitting it with that skid plate. Good stuff, now off to Baja to test it out... :jose Thanks Charlie!
Cheers pchGS, Give it a real good thrashing at Baja.....looking forward to your return posts. Charlie.
I used KTM nuts to match the rest of the bike. These have a smaller head so I did not have that problem :)
As long as you use loctite/thread lock no problem using the KTM nuts, I cant source nylocks any smaller, nylocks are just easier in the field and less likely to come loose. This isn't a problem if you torque the bolts using the allen heads in the countersinks and a spanner before you offer the plate up...as per instruction.
Installed mine today. It fits perfect and, it was easy to install. Just did a little Dremel toolin' to the frame on my 04 as required. Peace of mind is a good thing. Great Product. Thanks!
Nice one. Thanks for the feedback, its on quite a few pre 05.5 bikes, any props just give us a shout.