ADVrider

Go Back   ADVrider > Bikes > Thumpers
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 04-21-2006, 08:42 PM   #1
F=ma OP
Deceleration is Dangerous
 
F=ma's Avatar
 
Joined: Feb 2006
Location: Phoenix
Oddometer: 63
640 Rims

Anyone found that unbendable 640 rim?

F=ma screwed with this post 05-07-2006 at 02:28 PM
F=ma is offline   Reply With Quote
Old 04-22-2006, 09:58 AM   #2
woody's wheel works
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,307
SUN or Excel1.85 x21..mo betta

Quote:
Originally Posted by F=ma
Anyone found that unbendable 640 rim? I bent my Behr already. I was told the Behr are quite high end.. Are excel or sun really tougher? I was running 25+ pounds when I bent it... I had the stock front springs in at the time an bottomed out pretty hard. I have since put 5-4s in the front( much happier ), opinions, links? ( I have checked meat's might thread index, maybe I missed it ).
WELCOME to the bent front BEHR club,,,we can help ya ,,,check the hundreds of posts,,,and if you want it even stronger SUPERLACE it,,,check website below
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W
woody's wheel works is offline   Reply With Quote
Old 04-22-2006, 10:19 AM   #3
PASSMORE
Just the last name...
 
PASSMORE's Avatar
 
Joined: Apr 2004
Location: The Texas Embassy in Sloughhouse, CA
Oddometer: 4,246
Woody speaks truth

I am running a full boogy set of his wheels on my 640 and no issues what so ever
__________________
- Michael
facebook.com/passmoreranch
PASSMORE is offline   Reply With Quote
Old 04-22-2006, 11:15 AM   #4
meat popsicle
Ignostic
 
meat popsicle's Avatar
 
Joined: Feb 2004
Location: Circumlocution Office of Little Dorrit
Oddometer: 14,134
Quote:
Originally Posted by F=ma
Anyone found that unbendable 640 rim? I bent my Behr already. I was told the Behr are quite high end.. Are excel or sun really tougher? I was running 25+ pounds when I bent it... I had the stock front springs in at the time an bottomed out pretty hard. I have since put 5-4s in the front( much happier ), opinions, links? ( I have checked meat's might thread index, maybe I missed it ).
I have read many say (including Woody) the problem with the Behr rims is that they are too wide for any off-road tire to protect. Better for the street but obviously not for off road.

Did you bend it along the edge (minor dinging) or did you bend the F outa it? Pics? Bottomed out makes me guess you bent the whole F'er. Some did say they thought that particular model of Behr was too soft. The Excels and Suns have a great reputation; who knows if they are always better than all Behr models.

I thought the Aussie's enjoyed a recall on the Behr's but that might have been a dream I had once or some internet bull. Check with the Aussie 640a riders.
__________________
Kronreif Trunkenpolz Mattighofen LC4 640

Its not so much staying alive; its staying human that counts.
meat popsicle is offline   Reply With Quote
Old 04-22-2006, 02:17 PM   #5
sherpa
...Robert
 
sherpa's Avatar
 
Joined: Sep 2002
Location: Charlottesville, Virginia
Oddometer: 3,175
Shortly after I got my 640, I followed the general advice around here and had Woody build me a Sun 1.6 front wheel to replace the Behr 2.15 before I bent it...
__________________
Trebor Home Inspections


05 640 Adventure
08 KTM 250 XCFW

I'd trade all my motorcycles for one Flying Dragon.
sherpa is offline   Reply With Quote
Old 04-22-2006, 08:19 PM   #6
mars
Starbucks anyone?
 
mars's Avatar
 
Joined: Jun 2002
Location: El Reno,ok
Oddometer: 1,896
Go with Woody's. Send the wheels to him and get the Excels instead of the Suns. You can't use standard rim locks with the Suns. If you ride it hard you might up the front springs. I raised the oil level to 100 mm trying delay buying new front springs. He was able to use my stock hub and the stock front spokes that look very strong.

Who told you the stock rims were high quality?
mars is offline   Reply With Quote
Old 04-23-2006, 03:40 AM   #7
woody's wheel works
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,307
rim lock clarification and other observations..

Quote:
Originally Posted by mars
Go with Woody's. Send the wheels to him and get the Excels instead of the Suns. You can't use standard rim locks with the Suns. ...........He was able to use my stock hub and the stock front spokes that look very strong.

Who told you the stock rims were high quality?
FYI,,,there is only one Sun rim that comes in an oddball size...the 2.75'' width....all others are built to WM [wheel manufacturers assoc]standards

Sun doesn't have a 2.5'' wide, however it does have a 3.0''

we have found the source for 2.75 heavy duty rim locks and have 20 in stock....they work great,,,you do need at least 7 oz to counterweight them for road use

people often ask which is ''BETTER'' excel or sun,,,if you are concerned with weight,,,the Excels usually weigh alittle less and are a little less expensive,,,they rely on a 7000 series higher tensile strength alloy and use less of it,,,Suns on the other hand use a 6000 series alloy and are beefier

more often beefier rules in the adventure scene,,,,lighter is essential in supermoto,roadracing,mx

just a point of clarification,,,Behr puts out really nice rims,,,,someone at the factory is specing these rims,,,,Behr builds them to spec,,,,just like DID built rims to honda specs in '84,,,or for KTM in late 90s using too high tensile strength..they all cracked on the lips and nipple holes...

the point being,,,the rim manufacturer gets a bad rap for building what the mc engineers thought they wanted.i routinely use the same rim manufacturers standard/generic product line offered to the public with no negative consequences.

Another point,,at woody's wheel works,,we can build ya wheels on the cheap to save ya money,,i have boxes of oem spokes ,,we can use standard lace patterns,,,new or used rims n stuff,,,whatever your budget and standards allow,,,

HOWEVER,,,as a fellow adventure rider and motorcycle rider/racer i feel compelled to at least inform and offer you a better solution if it is available,,,so you can have more and better options to choose from,,,,there's nothing wrong with a big mac or a whopper but after ya tasted prime rib.......well, you get the drift.
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W

woody's wheel works screwed with this post 04-23-2006 at 03:48 AM
woody's wheel works is offline   Reply With Quote
Old 04-23-2006, 03:40 AM   #8
woody's wheel works
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,307
rim lock clarification

have no idea of what happened when i tried to edit the previous post ,,,??/all of a sudden 3 posts appeared,,,,so i deleted this and the next one????
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W

woody's wheel works screwed with this post 04-23-2006 at 03:50 AM
woody's wheel works is offline   Reply With Quote
Old 04-23-2006, 03:40 AM   #9
woody's wheel works
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,307
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W
woody's wheel works is offline   Reply With Quote
Old 12-23-2008, 03:29 AM   #10
Tappet
Feral
 
Tappet's Avatar
 
Joined: May 2007
Location: South Africa
Oddometer: 1,451
I need to replace my hexagonal behr's but I'm in the outer darkness at the moment so woody's is not an option.

I have found someone who can supply excels, but I'm wondering whether I'd be able to just buy the rims and move the spokes & hubs from the behr's to these excels? Is this even possible, and if so does anyone know if there's a thread that details spoke & hub removal & rebuilding?



Thanks in advance
Tappet is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 02:05 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014