|03-20-2009, 01:51 PM||#1|
Joined: Sep 2005
Location: Mukwonago, WI
We are running a Fall Special on CJ Designs LONG BLACK KTM Foot peg Extensions to help TEST out the NEW SITE.
Perfect for all those naked 950/990 Foot pegs out there.
These are NEW - NOT blemmed.
Promo offer $100 a set. Limited to stock on hand. First come, First Serve!
Order 3 sets or more - FREE Shipping in the USA, 1/2 off shipping outside the USA. Gets your buddies together for a group buy. This won't last long!
Retail $140 a set.
*Shipping will be refunded when I process the order. You MUST put your ADVrider name in "Business Blank"
CHECK IT OUT.
PIVOT PEGZ MK2 version are ready to ship. BLACK/ ORANGE and Machine Finish. Email me w/ your color and length choice. Same price as KTM version.
These fit on all bikes w/ Pivot PegzMK2 brand Pegs only. Will Not work with the MK3.
We have MK2 combo packs instock.
Long and Standard size pegs in BLACK, ORANGE colors are in stock ready to ship!!!
(mention ADVrider and give me your advrider name if your email me to get this discount.)
Originally I made these with out stainless pins. The Aluminum faces wore out faster, and lost there grip over time. They we also more slippery when wet. I updated the design to include Stainless steel pins to offer great grip with out ripping up the soles of your boots. I now have over 60,000 miles on my first set.
These extenders increases the size and length of your stock KTM footpegs.
You can even keep the stock rubber dampener in if you prefer to use those for extended freeway trips across the plains.
My size 12 boot was always sliding off the pegs and rolling in rough terrain, not anymore. These have been ergonomically designed to offer support and control of your motorcycle.
Some aftermarket pegs add width at the cost off limiting the amount the peg can flex up in a crash. That can cause a broken frame tab and an expensive repair bill. I've machined my version for clearance to allow maximum flex, just like the stock pegs.
Shown here: http://www.advrider.com/forums/showp...6&postcount=54
Two options will be offered.
1) Drill 3 small holes in each pegs yourself and install hardware for the cheapest price.
2) Send me your pegs. ($40 drilling charge) If I have extra pegs in stock I'll send you a set ready to install w/ preset springs and new cottter pins. Then refund the "Core Charge" ($80) when your set arrive to me.
These work on KTM pegs with
Pictures of pegs lengths are here.
Prices for DIY pegs kits.
Anodizing- Orange, Black.
If you need pegs too, price will depend on how much I have to pay for them. Contact me for info on what I have in stock.
Sending in your pegs to me to drill is an option too. Add $40.
Optional sizes shown here.
Comparison pics shown here:
Don't chance breaking your frame mounted peg tabs like other wider pegs can, it's not an easy or cheap fix. These have a built in a safety release so that won't happen.
My 2006 950S thread. 2006 950s update
New product updates here! Wordpress BLOG
click www.cjdesignsllc.com for the full line of products. FREE STUFF!!
cjracer screwed with this post 10-18-2012 at 09:46 PM
|03-20-2009, 02:55 PM||#2|
Joined: May 2002
Location: San Fernando Valley
Because you are starting with the stock pegs... the peg placement does not change, correct?
Mixing gas and haulin' ass.
|03-20-2009, 06:57 PM||#3|
Joined: Feb 2003
Location: Little Rock, AR
Any chance for an LC4 version?
Little Rock, AR
|03-20-2009, 07:15 PM||#4|
Joined: Jul 2004
Location: Pickwick Lake, Tennessippi
Craig - I have a pile of KTM's and would be interested in a test set. Send me a PM and we'll settle up. I need to square away a clutch with you too.
gaspipe [the original]
Hair of the dog....
|03-22-2009, 03:32 PM||#8|
Joined: Mar 2008
Location: Meridian, ID
Let me know the cost to send a set to you to be done. Not very precise in my drilling technique.
|03-22-2009, 07:18 PM||#9|
Joined: May 2008
Location: Newport, Mi
CJ, I'm in want mine in Orange. Have the original pegz, should i send them to you? Email me a bill
DUde your stuff rocks!
|03-22-2009, 11:35 PM||#10|
Joined: Feb 2004
Location: Michigan City, IN
I've been waiting for more information on these since I saw them at the IMS show.
The beatings will continue until morale improves.
|03-24-2009, 11:15 AM||#11|
Trusting my Cape...
Joined: Mar 2006
Location: Where the hell is Truckee, CA?
I updated my original post (#8) to l say this,
UPDATE- CJ, I would proably prefer the drill-it-yourself version, but I can go with whatever is convenient for you. Also, either way I can donate a set of stock pegs to the cause if you need them. Just let me know and I'll drop them in the mail and they are your to do with what you wish.
07 Yamaha R6
07 KTM 950 Super Enduro
04 KTM 250exc- plated two-stroke
01 Kawasaki KE100
74 Honda MR50
|03-24-2009, 02:59 PM||#12|
love what you do
Joined: Aug 2005
Location: New Hampshah
Nate in N.E.
Yes, I have a Dakar problem -- that there are 50 weeks of the year without Dakar!
They don't expect you to finish. That's why it's the Dakar. -- PPiA
|03-24-2009, 05:38 PM||#13|
Joined: Nov 2006
Location: Jackson, CA
DYI Kit Please
I want to try these on pivot pegs.
02 Aprilia Mille
06 KTM 525XC
06 KTM 950 ADV S
07 KTM 525EXC
07 Aprilia RXV 550
AMA, BLC, D36, IMBA, STM
I'm impulsive, hard headed and sometimes really stupid. Please do not take anything I say or do as a "correct thing" or a "fix" as it could be harmful to your wallet or person.
|03-24-2009, 06:30 PM||#14|
Dust In The Wind
Joined: Dec 2007
I'd like a set of the drill it youself peg's for my SE...Craig I think it would be an easy project with all the designing your doin....Ride On..
|03-24-2009, 07:15 PM||#15|
♪ ♪ ♪
Joined: Aug 2007
Location: Hammond, IN.
D I Y
Once in a while you get shown the light in the strangest of places if you look at it right
|Thread Tools||Search this Thread|