Billet LED light bars

[Bigtoy302]

These light bars are my latest creation.

Machined from solid 6061-T6 aluminum in house
7.875"wide,1.875"tall, 3"deep 2.8LBS Anodized black
6 Cree XM-L LT5 5000k LEDS
63 watts
12-22 Volts
Reverse battery protection
Micro controller
Thermal protection at 158°F 70°C
Changeable Optics
Abrasion Resistant Polycarbonate lens

Lights are made in house in the USA

High, Low and strobe modes accessed from a single ground momentary switch.

Standard hook up is connecting the power and ground directly to your battery and the mode wire turns it on/off selects modes.

Option power:
Light will turn on high when power is hooked up. Use this option if you want to wire the light to a relay and power it from switch like your high beams.

Lights will come with brackets of your choice: Weld on flat, Weld on 1.75" tube, 304 stainless L

Light comes with 10ft of wire. You will need to provide a fuse and switch.

On my Drz400 I have it hooked to the battery and use my old push button kill switch to turn on the light. This light makes night riding fun

$300 for one, $575 for two, $825 for three, $1100 for four, for the first 60 lights as a introductory price. After that they are going up to $325 for one $600 for two and $900 for three and $1200 for four.






RyDel Fab Led light bar operation - YouTube

RyDel Fab

Ryan

[Bigtoy302]

Night beam shots.

[rs42sport]

Kool any nite pics with all spot lenses??? Good luck with your product

[Bigtoy302]

Originally Posted by rs42sport

Kool any nite pics with all spot lenses??? Good luck with your product

The first pic is all spots. I do not have any other pics. I run the combo on my Drz.