HPMguy Triples for airhead fork upgrade - batch 2.

Clay Spinner · 11-05-2012, 02:24 AM

Hi all. There is a thread, that can be found HERE in which there has been a generous offer of machining another batch of clamps. This has been done previously; the thread that can be found HERE details everything that anyone may wish to know about them.

It is my understanding that for this to happen there may be a few more people who would like to convert their airhead to WP type 4860 forks ( that can be found on KTM 125-525 SX, XC, EXC, models from 2003-2011; they are identical externally (length, travel, caliper mounts, axle). Just need to confirm whether they are open or closed cartridges if you would like... I understand the preference is for open cartridges for a variety of reasons, some of which can be found HERE) required. So for selfish reasons, I wanted to reach out to the airhead fraternity incase people are not checking out the vendors thread...

To note interests, I suggest it may be best to post on the vendors thread... that, once again, can be found HERE.

Many thanks!

Stagehand · 11-05-2012, 05:47 PM

get em while they're hot

Cdubs · 11-05-2012, 10:51 PM

I posted in that thread, got the 50mm front end sitting in my garage waiting patiently :)

Clay Spinner · 01-16-2013, 01:31 PM

Last call, last call! See vendors thread for more details... as linked in my first post on this thread. Thanks for looking.

11-05-2012, 02:24 AM	#1
Clay Spinner ^OP Woodfire or Bust Joined: Nov 2008 Location: Dartmoor, UK Oddometer: 398	HPMguy Triples for airhead fork upgrade - batch 2. Hi all. There is a thread, that can be found HERE in which there has been a generous offer of machining another batch of clamps. This has been done previously; the thread that can be found HERE details everything that anyone may wish to know about them. It is my understanding that for this to happen there may be a few more people who would like to convert their airhead to WP type 4860 forks ( that can be found on KTM 125-525 SX, XC, EXC, models from 2003-2011; they are identical externally (length, travel, caliper mounts, axle). Just need to confirm whether they are open or closed cartridges if you would like... I understand the preference is for open cartridges for a variety of reasons, some of which can be found HERE) required. So for selfish reasons, I wanted to reach out to the airhead fraternity incase people are not checking out the vendors thread... To note interests, I suggest it may be best to post on the vendors thread... that, once again, can be found HERE. Many thanks!

11-05-2012, 05:47 PM	#2
Stagehand +/- V TDSPP Joined: Oct 2004 Location: "Poughkeepsie?!?!" Oddometer: 19,865	get em while they're hot __________________ What to do... What to do...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-05-2012, 10:51 PM	#3
Cdubs made for adventure Joined: May 2011 Location: SF, CA Oddometer: 50	I posted in that thread, got the 50mm front end sitting in my garage waiting patiently :)

01-16-2013, 01:31 PM	#4
Clay Spinner ^OP Woodfire or Bust Joined: Nov 2008 Location: Dartmoor, UK Oddometer: 398	Last call, last call! See vendors thread for more details... as linked in my first post on this thread. Thanks for looking.