Voltage, Temp, Time Meter

sanjoh · 01-18-2013, 07:51 AM

Introducing our Panel Mount voltage, temperature and time meter

This is the auto function mode

From our website:

Waterproof digital panel mount Voltage, Time and temperature meter.

Manual or automatic selection of function: manual selection using push button or auto cycle shows each function for 5 seconds.

DC 4-30v volts

12 hour clock

Temperature (F) - 256⁰ F maximum, 1 meter long thermocouple with stainless steel probe.

Sunlight viewable, anti-glare screen, bright red characters

Two button switch panel controls : 3.5" (89mm) leads

Three wire connection: Red power, Green voltage signal, Black ground. 5" (128mm) length leads.

Wiring allows the voltmeter to measure a different source than what is powering the meter. Connect power and ground to a switched connection and the meter will turn on with your vehicle.

Panel cutout size (width X height)-1.5" X .83" or 38mm X 21mm
Flange dimensions (width x height)- 1.6" X .95" or 41mm X 24mm
Depth is .6" or 15mm from back of flange
Overall depth is .7" or 18mm from front of flange

sanjoh · 01-18-2013, 05:14 PM

Two decimal places on the Voltage

Johno33772 · 01-19-2013, 08:34 AM

These look great....next time we get togther...I will take one .
Cheers
JA

Motomantra · 01-19-2013, 12:21 PM

The temp is for eng. coolant ? A nice ambient temp would be nice. I haven't seen one yet that I'm thrilled about.

sanjoh · 01-20-2013, 04:16 PM

Quote:

Originally Posted by Motomantra

The temp is for eng. coolant ? A nice ambient temp would be nice. I haven't seen one yet that I'm thrilled about.

The temperature can be used for ambient or engine coolant, plenty of range.

Motomantra · 01-21-2013, 10:15 AM

Great. Thanks.

sanjoh · 01-22-2013, 05:43 AM

The meter has a very durable stainless steel temperature thermocouple.

kbuckey · 01-22-2013, 06:51 AM

Well, nice to have one gauge to replace three. Even though there's a fair amount of room behing that dual sport fairing! Just ordered one.

sanjoh · 01-22-2013, 08:11 AM

Quote:

Originally Posted by kbuckey

Well, nice to have one gauge to replace three. Even though there's a fair amount of room behing that dual sport fairing! Just ordered one.

Thanks for your business!

What time zone are you in? I'll set the time for you.

kbuckey · 01-22-2013, 10:42 AM

Quote:

Originally Posted by sanjoh

Thanks for your business!

What time zone are you in? I'll set the time for you.

Mountain.

mwood7800 · 01-22-2013, 07:37 AM

Where can I find just a temp (water) gauge in a mini led that's in F

swimmer · 01-22-2013, 09:04 AM

Since the voltage signal is the same as the source power in this case is there any reason those two terminals couldn't be jumped and have a single wire coming in?

ParaMud · 01-22-2013, 09:19 AM

Can we set the time ourselves?

sanjoh · 01-22-2013, 09:59 AM

Quote:

Originally Posted by swimmer

Since the voltage signal is the same as the source power in this case is there any reason those two terminals couldn't be jumped and have a single wire coming in?

The meter has seperate signal and power wires. The benefit is you can connect the power wire to a switched (on/off with bike) and the meter comes on or turns off with the bike. You can connect both wires to the same source.

Quote:

Originally Posted by ParaMud

Can we set the time ourselves?

Yes, the meter has a small 2 button sub-panel.

01-18-2013, 07:51 AM	#1
sanjoh ^OP Purveyor of Light Joined: Feb 2007 Location: Sandbox, FL Oddometer: 3,667	Voltage, Temp, Time Meter Introducing our Panel Mount voltage, temperature and time meter This is the auto function mode From our website: Waterproof digital panel mount Voltage, Time and temperature meter. Manual or automatic selection of function: manual selection using push button or auto cycle shows each function for 5 seconds. DC 4-30v volts 12 hour clock Temperature (F) - 256⁰ F maximum, 1 meter long thermocouple with stainless steel probe. Sunlight viewable, anti-glare screen, bright red characters Two button switch panel controls : 3.5" (89mm) leads Three wire connection: Red power, Green voltage signal, Black ground. 5" (128mm) length leads. Wiring allows the voltmeter to measure a different source than what is powering the meter. Connect power and ground to a switched connection and the meter will turn on with your vehicle. Panel cutout size (width X height)-1.5" X .83" or 38mm X 21mm Flange dimensions (width x height)- 1.6" X .95" or 41mm X 24mm Depth is .6" or 15mm from back of flange Overall depth is .7" or 18mm from front of flange __________________ Model 60 LED 3600 lumens . . LED thread in Vendors Dualsport Fairing w LED...Dirt Ninja Build...TAT 08...

01-18-2013, 05:14 PM	#2
sanjoh ^OP Purveyor of Light Joined: Feb 2007 Location: Sandbox, FL Oddometer: 3,667	Two decimal places on the Voltage __________________ Model 60 LED 3600 lumens . . LED thread in Vendors Dualsport Fairing w LED...Dirt Ninja Build...TAT 08...

01-19-2013, 08:34 AM	#3
Johno33772 Johnny Africa Joined: Feb 2006 Location: St Petesburg, FL Oddometer: 560	These look great....next time we get togther...I will take one . Cheers JA __________________ YZ 250 / Triumph 800 XC / XR500 Street tracker project/ KTM 530 Plated

01-19-2013, 12:21 PM	#4
Motomantra Registered Lurker Joined: Mar 2008 Location: Beaverton, OR Oddometer: 662	I ASSume... The temp is for eng. coolant ? A nice ambient temp would be nice. I haven't seen one yet that I'm thrilled about. __________________ For those that fight for it, freedom has a flavor the protected will never know.

01-21-2013, 10:15 AM	#6
Motomantra Registered Lurker Joined: Mar 2008 Location: Beaverton, OR Oddometer: 662	Great. Thanks. __________________ For those that fight for it, freedom has a flavor the protected will never know.

01-22-2013, 05:43 AM	#7
sanjoh ^OP Purveyor of Light Joined: Feb 2007 Location: Sandbox, FL Oddometer: 3,667	The meter has a very durable stainless steel temperature thermocouple. __________________ Model 60 LED 3600 lumens . . LED thread in Vendors Dualsport Fairing w LED...Dirt Ninja Build...TAT 08...

01-22-2013, 06:51 AM	#8
kbuckey Gnarly Adventurer Joined: Dec 2005 Location: Lookout Mountain - above Golden, CO Oddometer: 477	Well, nice to have one gauge to replace three. Even though there's a fair amount of room behing that dual sport fairing! Just ordered one.

01-22-2013, 07:37 AM	#11
mwood7800 Gnarly Adventurer Joined: Feb 2011 Oddometer: 365	Where can I find just a temp (water) gauge in a mini led that's in F

01-22-2013, 09:04 AM	#12
swimmer armchair asshole Joined: Oct 2007 Location: tucson Oddometer: 2,568	Since the voltage signal is the same as the source power in this case is there any reason those two terminals couldn't be jumped and have a single wire coming in?

01-22-2013, 09:19 AM	#13
ParaMud Gnarly Adventurer Joined: Jun 2008 Location: Orange, CA Oddometer: 444	Can we set the time ourselves? __________________ 04 KLR 650 07 KLR 650 06 sv650s 07 Ducati Monster

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode