|07-01-2009, 02:36 PM||#1|
Mors longa, vita brevis
Installing: VisionX Solstice Solo LED Lamps
There's been some discussion in the Whelen's LED thread about these lights. I am starting this as its own thread rather than muddy that one (any further).
Over the next few days I'll be adding some Solos to my F650GSTwin as driving lights and posting to this thread as I get the BestRest light bar installed and these lamps wired up.
So, first let's open the boxes. I got a Euro (s1100) and a Spot (s1102) lamp and a multi-position switch will all be wired through an off-lo-hi switch mounted on my handle bars and powered from my recently installed relay-switched Centech fuse block.
Here's the box, a standard bubble pack:
In the box we have a lamp, a pig tail, a peg mount, an "omni mount" for joining multiple solos together, and some basic instructions.
Here's the light, all 12oz of it, with the pigtail attached.
Here's the the lens of the spot pattern light:
And here's the Euro, basically a spot with a bit more spread. You can see the diffuser in the center:
Here's the control:
The "Kill" button, provocatively named but currently I have no plan for it.
This is a work in progress, but I'll keep posting updates.
"A word of advice; if anyone uses the phrase 'as the crow flies' in your presence, slap him immediately. You are bound to want to slap him some time later." Metaljockey
2009 BMW F650GS (The Cruise Basselope)
2009 Yamaha Zuma 125 (Sold due to new commute)
2000 BMW R1100R (Blaue Engel) (Traded)
2006 DL650 Euro Black, lightly customized (Godzuki) (Sold)
|Thread Tools||Search this Thread|