|12-02-2009, 12:43 PM||#11|
GO Bacon GO !
Joined: Dec 2008
Location: Cottbus, Germany
And another update ;)
Checked and cleaned the parts
I also mounted a new (used) front rack, because there was a weld broken at mine...
Then I build in the motor
There were a few little problems ...
The srew from the oil line in the front of the engine knocked against the frame and therefore I could get it in the right position.
But after some filing this wasnīt a problem any more ^^
All pipes are built on, coolant and engine oil is in...
Vacuum connection for the fuel pump and temperature switch for the warning light are also fitted.
Filling and venting the clutch
Built on some parts
This is how it acutally looks...
Installed a new jet needle
The next thing I want to do is buying an Akrapovic full exhaust system
I also noticed that the Magura clutch armature doenīt fit with the old light / indicator switch - Iīm going to buy a CEV switch, which is a lot smaller...
|Thread Tools||Search this Thread|