KTM 690 Enduro centerstand

cybbe · 01-25-2010, 04:03 PM

thx for the answer. The problem seams to big for me to overcome, ill hang here and see if someone has som tecnical update that is a bit more "hands on".

Im no engineer, so i feel like im back to square one...
There is no easy plug and play solution here im afraid, any ideas how to solve this? maby some drawing to help...>

Maby bend 2 stainless pipes and mount them in the front with the standard bolts, and make them follow the line of the underside and into the holes(with rubber bushings) . Then weld another pipe or 2 across to bolt the skidplate in ... and go from there?

Im out of ideas..

Name: 690 under4.jpg
Views: 1045
Size: 134.6 KB

01-25-2010, 04:03 PM	#11
cybbe ^OP n00b Joined: Apr 2007 Oddometer: 9	ok thx for the answer. The problem seams to big for me to overcome, ill hang here and see if someone has som tecnical update that is a bit more "hands on". Im no engineer, so i feel like im back to square one... There is no easy plug and play solution here im afraid, any ideas how to solve this? maby some drawing to help...> Maby bend 2 stainless pipes and mount them in the front with the standard bolts, and make them follow the line of the underside and into the holes(with rubber bushings) . Then weld another pipe or 2 across to bolt the skidplate in ... and go from there? Im out of ideas.. cybbe screwed with this post 01-25-2010 at 04:19 PM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode