Go Back   ADVrider > Gear > Vendors
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 02-12-2010, 02:30 PM   #1
Stovebolt OP
Team Ruptured Buzzard
Stovebolt's Avatar
Joined: Mar 2006
Location: Tetons
Oddometer: 482
Custom GPS Cradles for select Garmins and SPOTs


As users of the 60-series Garmin GPS's are probably aware, there are cradle mounting options from RAM and TOURATECH, and either of those cradles may serve. Some users, myself included, have noticed that while the RAM mounting system is a great system - at least it is in my opinion, that the cradles themselves can leave a little to be desired. So, I went ahead and made my own to keep the pesky GPS unit attached to my cockpit. Long story abbreviated, I made a few for some friends going off-road to Baja, and they reported that they were an improvement over the RAM cradles, certainly in terms of performance - no more premature ejections....Each one is made by me by hand using Kydex or Concealex materials, tools I have fabricated from scratch, and they take me a bit of time for each one. I haven't tooled for mass production and I do this more or less as a kitchen table home occupation effort.

If anybody wants a cradle, I'll sell you one for $75 and mail it to you CONUS USPS. You'll need to mail me a check. Free shipping remains in effect for ADVRider inmates, indefinitely. That is, free mailing US Postal Service, Flat Rate Priority Mail with USPS tracking to the continental United States addresses. International may be extra, but no UPS or FEDEX.

The power on/off button area is relieved for access and the buttons are easily navigable with a gloved hand. I've tested these new-improved cradles on my snowmobile on clapped-out trails in Idaho and Montana, and I really like it. I call it the "Buzz Bomb Cradle" because it's a Team Ruptured Buzzard effort. (RAM ball/diamond mount not included, but I send a pre-drilled reinforcement insert with two bolts and locknuts for mounting to the standard RAM ball/diamond.)

These are the kinds of things you will need (and supply for yourself - I don't sell these RAM mounts) to mount my CRADLE -

A RAM diamond plate with ball

The BUZZ BOMB Cradle is designed to connect to the RAM Diamond Plate on the back of the cradle. The diamond plate has a 1.0 inch diameter rubber ball connected at right angles to the plate, which connects directly to the 1 inch arm socket. You will also need the RAM arm socket...

You will also need a way to get this onto your bike, and there a different ways to do that with the RAM system. A common mounting is on the handlebars using a setup like this...

Medium length arm kit: or maybe,

Short length arm kit:

Thats the basics. There are so many options to "get your balls together" with RAM components that each rider needs to sort that out with their own bike. Different handlebar diameters take different sized U-bolts, so pay attention to your dimensions when shopping. But I will stress that the cradle I make is designed to work only with the RAM mount system. The adjustability and shock absorption and impact resistance of the RAM mounts help keep my cradles "bomb-proof." Mounting them any other way with any other components is specifically advised against. Please don't do that... it's a bad idea and it defeats a specific design feature/concept. Do not "hard mount" to anything without using the RAM mount system.

PM for further if interested, or post here. If BALDY runs a Garmin 60CSX and wants one, his is free.


Dave Jankowsky
aka "Stovebolt"
Victor, Idaho



Garmin 60-Series Black Carbon Holstex
Garmin 78-Series Limited on hand availability - check with me
Garmin Montana Series Black Carbon Holstex
Both Generation SPOTS Black or (Gray fleck carbon KYDEX - discontinued color. Check with me for colors...)

All models remain $75 and I will pay to mail them to any ADV inmate within Continental United States via US Postal Service, Flat Rate Priority Mail, for free.
I don't take PayPal or credit cards.
Garmin Montana now available - September 2012

Montana - Carbon HOLSTEX

Garmin Montana on left and Garmin 60CSx on right - Carbon HOLSTEX

Montana and GEN1 SPOT

G60 and GEN1 SPOT


Garmin 60-Series / Garmin 78-Series / Garmin Montana Series / GEN1 SPOT / GEN2 SPOT
G78 on left and G60 on right, mounted up for display on Casper my Friendly Punkin. 2010 450 XC-W Six Days dream bike.

Team Ruptured Buzzard "Never Give Up"

Stovebolt screwed with this post 11-05-2013 at 07:21 PM Reason: update product info
Stovebolt is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 05:52 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015