|09-18-2010, 08:28 PM||#1|
Joined: Nov 2006
Highfive - WRR Athena Big Bore Project
Hhhmmm....what's this waiting on the Rancho Highfive doorstep?
Could it be...
Yes indeed! My Athena 290 Big Bore Kit has arrived....along with a couple of companions. A pretty little pair of Power Commander V and AutoTune units. And very quickly, I'm beginning to feel like this:
So, let's dive in ! ! !
I am going to use this thread to document a step by step procedure for the installation of this Athena 290 Big Bore into my Yamaha WR250R. Lots of folks have asked me for a detailed pictorial and explanation. So, here you go! I'll take you through my very own "discovery process" as I disassemble my stock engine, and replace it with this bad boy. I'll also include my tuning procedures all the way through completion.
You will notice I perform all of these procedures in my little 'ol cramped & messy garage floor. Nothing fancy about it. But someday, I hope to improve on that.
Fill your popcorn and get a big drink....then kick back and enjoy the show. I will share some of my own little tricks along the way, which might make your wrenching efforts a little easier too. I've never dug so deep into this bike before, so we are bound to learn some interesting things together.
Here we go....let's find out if this box of goodies is worth the expense.
'13 Husky TR650 Terra, '11 Husaberg FE390, '10 BMW F800GS, '12 BMW R1200GS
Terra-izing the CDR Bergs Over the Rainbow Texas or Bust!
Rocky Mountain HighFive The Other Side of Nowhere
Athena Big Bore Project WRRDualsport.com
HighFive screwed with this post 09-18-2010 at 10:45 PM
|Thread Tools||Search this Thread|