ADVrider

Go Back   ADVrider > Gear > Vendors
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 01-24-2011, 10:35 AM   #25
Roadracer_Al
louder, louder, louder!
 
Roadracer_Al's Avatar
 
Joined: Aug 2007
Location: Oakland, CA
Oddometer: 1,428
I bolted my Zumo 550 motorcycle holder directly to the dash. I had to reposition it about 1/4" lower because the swinging locking bar was blocked -- too close to the top.

I recently upgraded to the Zumo 660, and the holder uses the same bolt pattern as the 550 mount. The 660 mount is much slimmer, and even though the screen is much bigger, the footprint on the dash is actually smaller than the 550.

The locking system is also different, using a push button on the right side to release the unit. Mounted directly, flat on the dash, there isn't enough room for my finger to release the GPS from the mount. It needs about a 1/2" spacer on the top bolts to allow room to depress the release button.
__________________
------------------------------
Suck, Squeeze, Bang, Blow
------------------------------
New Rider Training in the San Francisco Bay Area at Motorcycle University". Learn to Ride...Better!
Roadracer_Al is online now   Reply With Quote
 

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 05:52 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014