1968 Bultaco Matador m26

blaine.hale · 05-14-2011, 08:05 PM

Progress!
I got the jug back today. Beautiful 55% semi-gloss black :)
Couldn't be more happy with the results! I do, however need to get some slight over spray on the gasket surfaces. What grit paper do ya'll recommend for resurfacing? (If that is recommended)

The crank case halves are polished and I put the transmission assembly back in. Have one more bearing to get in and I can make big progress.
Those crank shaft bearings just fall on when you get the right temperatures!

05-14-2011, 08:05 PM	#24
blaine.hale ^OP Beastly Adventurer Joined: Feb 2009 Location: Atlanta, Ga Oddometer: 2,294	Progress! I got the jug back today. Beautiful 55% semi-gloss black :) Couldn't be more happy with the results! I do, however need to get some slight over spray on the gasket surfaces. What grit paper do ya'll recommend for resurfacing? (If that is recommended) The crank case halves are polished and I put the transmission assembly back in. Have one more bearing to get in and I can make big progress. Those crank shaft bearings just fall on when you get the right temperatures! __________________ 1974 BMW R90 /6 1968 Bultaco Matador MK3 1973 BMW R75 /5 Toaster LWB 1969 Bultaco Bandido MK2 2013 Husqvarna Terra TR650

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode