R 1100/1150 GS/RT/RS/R/S throttle body repair kit

[drcool]

Hi Dan, likely another candidate for your kit.

2000 R1150GS with 96000 miles and counting. My right throttle body is louder than my wifes washing machine and my 3500-4000rpm cruise has a hugh stumble. I attribute my difficult in syncing the TB's to the worn out shafts and expect this will help a lot.

Please forward payment info, shipping will be to Ontario, Canada.

email david@bdbi.ca

Thanks
drcool

[Dan Cãta]

Email sent.

10q,
Dan.

[palciatko]

Hi Dan;

I sent you an email.

Thanks,
Palciatko

[Dan Cãta]

Originally Posted by palciatko

Hi Dan;

I sent you an email.

Thanks,
Palciatko

Replyed to.

Dan

[GSMax]

Hi Dan,

Can you please send me instructions how to order it. My mail: rupnikb@volja.net

Best regards
Bostjan

Originally Posted by Dan Cãta

I can re-haul intakes for all 1100 an 1150 BMW boxer motorcycles.


After using the bike for a few years, the spindle and the intake bushings get worn, resulting in the spindle play, resulting in that annoing rattle and may leading to bike surging.


I can fix your intake if you send it over or I cand send you a complete rebuild kit and do the work yourself.


A kit contains:

• a new splindle(shaft);
• necessary bushings;
• set of complete o-rings;

Having the intake full repaired is just like having a new one, but at a fraction of a cost.


Just contact me specifying what bike model do you have and the manufacture year.







The price is 60$ + shipping.



Dan.

[Dan Cãta]

Email sent ;)

Dan.

[palciatko]

Hi Dan,

I sent you an email and money (paypal transaction completed) two days ago - did you receive them?

Thanks
Palciatko

[Dan Cãta]

Originally Posted by palciatko

Hi Dan,

I sent you an email and money (paypal transaction completed) two days ago - did you receive them?

Thanks
Palciatko

Replyed to you.

Dan.

[Trav_L_R]

Great a rebuild kit.
I've got a 99 1100 RT, Bing TB's 75/45/105 and 106. have you got a kit for these?

What metal are your bushings made of?, is that the same as the stock bushings?

I live in Wisconsin, USA. I've read that your prices are $60 plus shipping between $13-19. is this correct?
What is the esimated shipping time and how do you take payment?

Thanks,
Travis.

[Dan Cãta]

Originally Posted by Trav_L_R

Great a rebuild kit.
I've got a 99 1100 RT, Bing TB's 75/45/105 and 106. have you got a kit for these?

What metal are your bushings made of?, is that the same as the stock bushings?

I live in Wisconsin, USA. I've read that your prices are $60 plus shipping between $13-19. is this correct?
What is the esimated shipping time and how do you take payment?

Thanks,
Travis.

Email sent.

Dan.

[palciatko]

Dan,

Thank you very much for your kit. Great work! TB rattling has gone.

To get old bushings out, I used M10 screw tap.

In the kit (for 1150GS), there are 4 small O-rings - where should they fit? I used two of them on air bypass screws (?).

I have no locknuts (1150GS) on shaft (pulley side) - I used small hex screw and aluminium washer from kit as locknut - but there is small play between pulley and shaft. Any advice how to fix it?

[Dan Cãta]

PM sent.

Dan.

[Snarfy]

Hi Dan,

Can you please send me instructions how to order it. My mail: snarfy666@gmail.com
Would be for the right hand side of a 2000 R1150GS
Shipping will be to the Netherlands

Best regards
Ard

[Dan Cãta]

Email sent.

Dan.

[mrdod]

Dan,

Thanks a million for your great communication and product. You answered my questions immediatly and shipped the kit to Texas without delay. You also notified me with the shipping information so I could track the order. Your step by step repair instructions on the forum are priceless. I will be sending my HES for rebuild soon and have a friend who will be getting TB kits from you also.

David