|07-29-2011, 09:48 PM||#11|
I don't ride much.
Joined: Feb 2008
Location: LA - Lower Alabama
It's all good!
I don't really have a car to use on a daily basis - so this bike will probably serve as a commuter / DS fun weekend bike. I have a K12S that I'll probably keep as a long distance bike, and a Ninja 250 that has been superb, but I'll probably part with as it's just not as beloved as either of others.
Found just a couple of pics from the build - I wish I had more from the early stages, but it looks like those are gone and lost forever.
***EDIT*** More pics found 8/10/2012!!! See page 6!
Frame - Initially I wanted to use the factory downtube, I bent it forward halfway, but it wasn't enough room. Limited resources and knowledge here, so I cut out a section of the factory 650R frame (above) to use.
Motor in Frame:
Factory Ninja Tank with fuel pump fitting cut out:
Old propane tank brazed to factory fuel pump fitting:
Motor has to be offset for sprocket alignment:
A few more can be found here:
Krasniewski screwed with this post 02-03-2013 at 07:31 AM
|Thread Tools||Search this Thread|