|08-29-2011, 01:20 PM||#1|
NorthWest Adventure Rider
Joined: Jul 2007
Location: Eastern WA State
Hodakaguy's "Twist-A-Plate" - Rotate your Dual Sport Plate
The Twist-A-Plate is designed to allow you to run your plate in the Vertical position when off road and in the Horizontal position when on the road to remain legal, now you can be Legal when you need to be! The plate is pre-drilled and ready to mount onto all KTM's with the Euro LED tail light assy, should also work great on the Husabergs with the same Euro Tail light setup. (Can be used as a universal setup on other bikes as well if you drill the corresponding 3 mounting holes onto your existing plate bracket) Each Twist-A-Plate comes with stainless steel mounting hardware and detailed mounting instructions, mounts up in just minutes!
The Twist-a-plate is made from high impact UV stable ABS plastic that is very strong and durable. To rotate the plate you just pull the quick release pin, rotate the plate and re-install the pin....it's that simple.
This is my second generation Twist-A-Plate. My first test unit used embedded magnets to hold the plate, while it worked great it was less secure than the current version. The 2nd generation unit has a larger/stronger pivot assy as well as the quick release pin that adds extra security.
The Twist-A-Plate is $37 + $5 Shipping.
Here's a few shots of the assy mounted on my KTM 530XCW as well as a short video demo of the unit.
Here's a couple shots of the unit mounted on the bike
And within seconds your in the legal horizontal position.
To This...in seconds.
And a short video demo of the Twist-A-Plate.
NV 2012 - In Memory of the Crewmen RR: CLICK HERE
Adventure Is Out There - NV RR: CLICK HERE
Riding Through History - NV RR: CLICK HERE
And Then There Were Four - OR RR: CLICK HERE
My VW Syncro Westy Build Thread: CLICK HERE
Hodakaguy screwed with this post 04-14-2012 at 11:46 AM
|Thread Tools||Search this Thread|