|09-13-2005, 02:56 PM||#1|
Inventor Of The Wheel Mk2
Joined: Jul 2003
Location: Peoples Republic Of Canuckistan
BST Bowl Machine Screws
Anyone know the size (thread, length, etc) of the machine screws that hold the bowl on the BST carb on a 640 Adv?
Parts have all arrived (was waiting on the Sommer air filter screen) and I've mod'd the stock exhaust can on my '05 640 - so can finally rejet the bugger, but want to replace the OEM Phillips mach screws with proper hex-head ones.
Since will likely have to order bolts - or search for them ahead of time (live in rural area on Canadian east coast), I'd like to have them on hand before I start work.
Changed wife's idle fuel jet on her 640 a month or so ago, I but stupidly forgot to check the size of the bowl screws when I had the bike opened up (her bike already had the screws replaced by hex heads by the shop that did the original tuning work).
"...who gives a rat fornication?"
|Thread Tools||Search this Thread|