Rekluse EXP - Page 5

sito · 03-21-2012, 01:22 PM

Rekluse has been great. Talked to them explained the issues. They told me to send to old one back and they shipped me out a new one (got it today) They have added a few washers to the pressure plate and it looks like the instructions have been tweaked a little. I will be installing this tonight to see if this is the fix. I have had nothing but good experience with these guys and they really seem to care about my issue.

Dagwood_55 · 03-23-2012, 04:59 PM

So, my EXP is supposed to be here on the brown truck on Monday.

I want to have everything to get it done at once.

I've read somewhere that you use a specific fluid for the hydrolic clutch, meybe mineral oil.

What and how much do I get for this??

cjracer · 03-23-2012, 05:01 PM

Quote:

Originally Posted by Dagwood_55

So, my EXP is supposed to be here on the brown truck on Monday.

I want to have everything to get it done at once.

I've read somewhere that you use a specific fluid for the hydrolic clutch, meybe mineral oil.

What and how much do I get for this??

I use Mobile 1 ATF.

bikyto · 03-23-2012, 05:04 PM

Quote:

Originally Posted by cjracer

I use Mobile 1 ATF.

+1 good stuff

sito · 03-24-2012, 04:19 PM

Quote:

Originally Posted by sito

Rekluse has been great. Talked to them explained the issues. They told me to send to old one back and they shipped me out a new one (got it today) They have added a few washers to the pressure plate and it looks like the instructions have been tweaked a little. I will be installing this tonight to see if this is the fix. I have had nothing but good experience with these guys and they really seem to care about my issue.

Success

we are in business, followed the instructions and the clutch worked perfectly.

cjracer · 03-24-2012, 04:31 PM

Glad to hear you're up and rolling again.

Apple Jam · 03-25-2012, 07:47 AM

Quote:

Originally Posted by sito

They told me to send to old one back and they shipped me out a new one (got it today) They have added a few washers to the pressure plate and it looks like the instructions have been tweaked a little.

So, have these "washers" been added to all the latest shipped EXPs?
I Haven't got around to installing mine yet,
I'm planning that for the first week in April.

bikyto · 03-25-2012, 08:39 AM

Quote:

Originally Posted by Apple Jam

So, have these "washers" been added to all the latest shipped EXPs?
I Haven't got around to installing mine yet,
I'm planning that for the first week in April.

Yes the washers should be shipped with them. Easy as pie

cjracer · 03-26-2012, 08:09 AM

Quote:

Originally Posted by Apple Jam

So, have these "washers" been added to all the latest shipped EXPs?
I Haven't got around to installing mine yet,
I'm planning that for the first week in April.

Yes, All the kits that I shipped out have the updated instructions and washers added.

Dagwood_55 · 03-26-2012, 04:10 PM

Woo hoo!. Got my Rekluse in today and installed. Was so easy, even a cave man could install one.

And I've had reg/old style rekluses on my last few dirt bikes, but not only was this the easiest to install, it works
the best of the bunch.

Just hope I don't burn up my clutch lugging around in 2nd gear, so smooth....

Alleycatdad · 03-26-2012, 05:23 PM

Didja use stock settings or make the changes mentioned earlier in the thread?

S

Dagwood_55 · 03-26-2012, 06:03 PM

Quote:

Originally Posted by Alleycatdad

Didja use stock settings or make the changes mentioned earlier in the thread?

S

My bike is a 07 S. I put it together totally stock and did'nt have to adjust it any. It felt dialed in perfect from the get go. Rattled a minute or two, but then quit that. Hardest part was taking off and putting back on the rear brake pedal.

But, I havent read all this thread, so not aware of changes mentioned....

CrazyLegs · 03-28-2012, 10:01 AM

Hey Guys,
I'm thinking about putting in one of these, taking out the z-start. Would like to have the bumpstart capability.
Anybody interested in a z-start pro? Anyone have clear directions for swapping them? I suppose I can just undo the install and then start over. Don't want to get anything out of order or use the wrong bits.
J

cjracer · 03-28-2012, 01:17 PM

Quote:

Originally Posted by CrazyLegs

Hey Guys,
I'm thinking about putting in one of these, taking out the z-start. Would like to have the bumpstart capability.
Anybody interested in a z-start pro? Anyone have clear directions for swapping them? I suppose I can just undo the install and then start over. Don't want to get anything out of order or use the wrong bits.
J

As long as you still have all the OEM parts you took out for the Pro install, they swap back no problem. Just follow directions in reverse or follow KTM service book. I've done that with no issues.

Narsisco Lopez · 03-30-2012, 07:40 AM

Just ordered mine from CJ today.

03-21-2012, 01:22 PM	#61
sito Where the Hell am I? Joined: Feb 2007 Location: Monrovia CA Oddometer: 1,489	Rekluse has been great. Talked to them explained the issues. They told me to send to old one back and they shipped me out a new one (got it today) They have added a few washers to the pressure plate and it looks like the instructions have been tweaked a little. I will be installing this tonight to see if this is the fix. I have had nothing but good experience with these guys and they really seem to care about my issue. __________________ I'm a GPS Wizard follow me?

03-23-2012, 04:59 PM	#62
Dagwood_55 Beastly Adventurer Joined: Jun 2007 Location: The Ozarks Oddometer: 1,026	So, my EXP is supposed to be here on the brown truck on Monday. I want to have everything to get it done at once. I've read somewhere that you use a specific fluid for the hydrolic clutch, meybe mineral oil. What and how much do I get for this?? __________________ Live long, love much, laugh often, and Ride, Ride, Ride.....

03-24-2012, 04:31 PM	#66
cjracer AWD please!! Joined: Sep 2005 Location: Mukwonago, WI Oddometer: 3,867	Glad to hear you're up and rolling again. __________________ My 2006 950S thread. 2006 950s update New product updates here! Wordpress BLOG click www.cjdesignsllc.com for the full line of products. www.outriderjournal.com FREE STUFF!!

03-26-2012, 04:10 PM	#70
Dagwood_55 Beastly Adventurer Joined: Jun 2007 Location: The Ozarks Oddometer: 1,026	Woo hoo!. Got my Rekluse in today and installed. Was so easy, even a cave man could install one. And I've had reg/old style rekluses on my last few dirt bikes, but not only was this the easiest to install, it works the best of the bunch. Just hope I don't burn up my clutch lugging around in 2nd gear, so smooth.... __________________ Live long, love much, laugh often, and Ride, Ride, Ride.....

03-26-2012, 05:23 PM	#71
Alleycatdad Unbunch yer panties! Joined: Feb 2008 Location: True Norcal, not that Bay Area/Sacto Crap... Oddometer: 1,111	Didja use stock settings or make the changes mentioned earlier in the thread? S __________________ When in doubt, PIN IT! It may not help, but it'll sure end the suspense... Wretched Exce$$ See ADVr's around the world-ADV spotwalla page Riding Wretched Wretched Passes Bad decisions make good stories.

03-28-2012, 10:01 AM	#73
CrazyLegs ^OP In midlife crisis. Joined: Nov 2007 Location: Colorado Mountains Oddometer: 63	anybody take out a Z-start pro and replace with the EXP? Hey Guys, I'm thinking about putting in one of these, taking out the z-start. Would like to have the bumpstart capability. Anybody interested in a z-start pro? Anyone have clear directions for swapping them? I suppose I can just undo the install and then start over. Don't want to get anything out of order or use the wrong bits. J __________________ If anything is gonna happen, it's gonna happen out there - Captain Ron

03-30-2012, 07:40 AM	#75
Narsisco Lopez Addlepated Joined: Jul 2010 Location: Golden (Showers), Colorado Oddometer: 2,112	Just ordered mine from CJ today.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode