ADVrider

Go Back   ADVrider > Bikes > Some Assembly Required
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 03-27-2012, 10:43 AM   #11
jdrocks
Gravel Runner
 
Joined: Jul 2007
Oddometer: 3,997
Quote:
Originally Posted by pjm204 View Post
Well hopefully mine isn't on there as tight. It is only supposed to be 92ft/lbs. we shall see. I mean at some point the front sprocket needs to come off, they certainly don't last forever.
the nut is on there with at least 300# from the factory. use an inch impact socket rather than metric for a better fit, you can easily split a regular socket with that kind of torque. the easiest way to break the nut loose is with a HD impact, or if that doesn't work, lock the sprocket with a piece of small diameter schedule 40 pipe nipple placed against a sprocket tooth and the swingarm, then use a breaker bar.

the trans should NOT be in gear.
jdrocks is offline   Reply With Quote
 

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 02:52 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014