Go Back   ADVrider > Bikes > Old's Cool > Airheads
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 05-09-2012, 07:57 PM   #1
DiabloADV OP
Joined: Oct 2010
Location: Nor Cal, USA
Oddometer: 2,326
R90/6 Texas Dirtbike rebuild

So I picked up this dirtbike. Will be doing a frame-off refresh, and change the styling a bit more toward scrambler. Figured I'd start a thread so I can ask all my questions and give progress reports in one spot. The bike starts and I rode it 20 miles home, but it's really rough. Won't idle and the exhaust pressure between the two sides was WAAAAAY different. It needs some love. Previous owner got it running after it was sitting for 5 years, but that's all he did.

Folks will want to see the rear end modifications. Extended swingarm, custom shock mounts and subframe. Cable-activated brake from custom brake lever.

Front is XR600 forks with CR500 hub. Nice fork brace down low.

I pulled the top end today and it's a sticky gooey mess. Wet carbon everywhere. Sealant half clogging up the stud holes. I'll take the heads, cylinders and pistons to somebody that knows more than me to have them assessed for next step. But...good news is no valve recession and the conrods seem perfect.

Anyhoo...more as it happens....
1974 R90/6 motor w/1050 kit; twin plugged; installed in...1970 R60/5 frame; RM125 front end; KZ1000 Police Tank.
DiabloADV is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 08:51 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015