Airhead Flea Market Thread - Page 4

DiabloADV · 05-25-2012, 10:21 PM

Quote:

Originally Posted by Dirtnadvil

I have a 1970 R75/5 that I am starting to rejuvinate. Yesterday I was pulling out the starter so I could rebuild it when I discovered that the housing of the starter was broken where the starter bolts to the mount by the fly wheel. The bell housing was broken as was one of the ears where it bolts on to the mount. I am looking for the housing only.......Thanks

I have a starter that I'll eventually sell, but you should follow this one.

http://www.ebay.com/itm/BMW-Motorcyc...sories&vxp=mtr

You never know, it might go cheap. More than just a housing, but if the price is good....

tdrrally · 05-26-2012, 05:04 AM

i'm looking for a stock seat for my 84 r80rt a /7 seat might work too

BalthazaarCalrissian · 05-26-2012, 06:09 PM

Looking for a used orange red R80g/s Paris Dakar solo seat and rack combo.

Thanks

JonnyCash · 05-27-2012, 12:52 PM

I'm looking to find a single air tube, the one between the air box and the carb, for a 40mm Bing, and also one peanut valve cover in decent usable condition. For the one valve cover, I'd happily swap a set of decent unpainted /7 covers if that would be of interest. Thanks.

disston · 05-27-2012, 02:15 PM

Quote:

Originally Posted by JonnyCash

I'm looking to find a single air tube, the one between the air box and the carb, for a 40mm Bing, and also one peanut valve cover in decent usable condition. For the one valve cover, I'd happily swap a set of decent unpainted /7 covers if that would be of interest. Thanks.

The peanut valve covers are interchangeable side to side but the air tubes are side specific.

Mista Vern · 05-28-2012, 11:47 AM

WTB: Brown sidestand for 79 R100RS. Appearance not important.

JonnyCash · 05-28-2012, 03:10 PM

Quote:

Originally Posted by disston

The peanut valve covers are interchangeable side to side but the air tubes are side specific.

I wondered if that was the case. I'll have to figure out which one I do have, so I know which one to ask for. Thanks for the info.

disston · 05-28-2012, 03:59 PM

I always had trouble getting the air tubes back on my R90/6. A couple of years ago I found I had several extras so I played with swapping them around a bit. I found a better fitting pair. Now no problems as long as I don't try to put them on upside down or something.

boxerboy81 · 05-28-2012, 11:03 PM

WANTED:
38mm exhaust header pipes for 1981 R100RS BMW.
Single cross-over.
Prefer stainless steel.
Must be in good condition.

I'm in Oz.

smorgasgeorge · 05-29-2012, 06:09 PM

Upgraded my alternator to an Enduralast.
Had a professional do it, and he returned a box with all the parts he took off.
Never had an issue with the original.
Everyone here seems to think I should keep it, but I just don't like keeping a bunch of stuff around.
Especially since I move every year or two.
So it's all for sale.

Asking for $100 plus shipping.
I'm in DC.
You probably know what an alternator weighs and how big the box is.

I'll throw in a pair of what are probably original GSPD flood lights (also working) made by Bosch if you want 'em.
Obviously that'll make the box bigger.

If you want to see a picture of all the parts, shoot me your email address and I'll do it tomorrow.
If you have a pair of lightly used Sidi Discovery Rains, Size 44 please also let me know.
Cheers

Requisite ADV Emoticon:

Boxer_Bolshie · 05-30-2012, 01:39 PM

Was going to install this when I got the right side but have decided not to (the wife wants the money :(

It's in excellent condition with only some very light scratches which should be able to be buffed out and some small paint chips off the bottom edge. I'm selling it on eBay for $75 but will sell to advrider.com members for $65 with free ship (within the lower 48 US), a little more for HI, AK and Canada. Sorry but I can only accept $ via Paypal.

This will only fit the dual shock R65 and R45.

I will Priority mail it via USPS unless HI, AK and Canada.

You can shoot an email to me at twodeadpoets at gmail dot com for questions

Thanks!

Boxer_Bolshie · 05-30-2012, 10:05 PM

R65 battery cover SOLD!

princess jamaica · 05-31-2012, 02:59 PM

Since my sidestand gave way today,I'm looking for a set of crash bars."83 R100RS,full fairing(with new chips in the upper left

).

Les_Garten · 05-31-2012, 08:35 PM

I have a 92 Monoshock

Looking for SS Headers, preferably Keihin in VGC to Mint. I have the H Pipe and the mufflers already.

Also looking for VGC Ohlins Monoshock setup

bpeckm · 06-01-2012, 09:00 AM

I am looking for a set of crashbars that will fit the 80ST.... black or chrome, probably prefer black. What is really need is the sidestand, so if someone has a clever way of doing that, I would love to hear about it.

This bike is no raving beauty, so "patina" is very welcome, indeed!

Muito obrigado!

05-26-2012, 05:04 AM	#47
tdrrally Beastly Adventurer Joined: May 2008 Location: doing hard time in charleston,wv Oddometer: 2,864	i'm looking for a stock seat for my 84 r80rt a /7 seat might work too __________________ 2002 DRZ250 what it lacks in horse power it makes up for with traction for sale 2000 DRZ400e tagged 1980 TS125 project in the corner 200? zuma 50/70 the wifes bike

05-26-2012, 06:09 PM	#48
BalthazaarCalrissian n00bl3tte Joined: Sep 2010 Location: Beautiful Oklahoma Oddometer: 42	R80G/S PD Solo Seat Looking for a used orange red R80g/s Paris Dakar solo seat and rack combo. Thanks __________________ "You've never heard of the Aluminum Falcon? Its the bike that made the Blue Note run in less than 2 minutes. She's fast enough for ya' old man."

05-27-2012, 12:52 PM	#49
JonnyCash turd polisher Joined: Jan 2011 Location: Midcoast, Maine Oddometer: 771	air tube and valve cover I'm looking to find a single air tube, the one between the air box and the carb, for a 40mm Bing, and also one peanut valve cover in decent usable condition. For the one valve cover, I'd happily swap a set of decent unpainted /7 covers if that would be of interest. Thanks. __________________ I wouldn't bring her home to Mama, but Mama ain't home tonight.

05-28-2012, 11:47 AM	#51
Mista Vern Knows all - tells some. Joined: Dec 2005 Location: McMinnville, Oregon Oddometer: 12,880	WTB: Brown sidestand for 79 R100RS. Appearance not important. __________________ Remodeling. Please check again later.

05-28-2012, 03:59 PM	#53
disston ShadeTreeExpert Joined: Mar 2011 Location: Silver Spring, Md Oddometer: 5,009	I always had trouble getting the air tubes back on my R90/6. A couple of years ago I found I had several extras so I played with swapping them around a bit. I found a better fitting pair. Now no problems as long as I don't try to put them on upside down or something. __________________ Never memorize something you can look up. ---Albert Einstein

05-28-2012, 11:03 PM	#54
boxerboy81 Stay Horizontal Joined: Jul 2009 Location: Oz, Australia Oddometer: 1,603	BMW R100 header pipes. WANTED: 38mm exhaust header pipes for 1981 R100RS BMW. Single cross-over. Prefer stainless steel. Must be in good condition. I'm in Oz. __________________ R100RS Gallery, over 800 pictures...

05-29-2012, 06:09 PM	#55
smorgasgeorge Adventurer Joined: Sep 2010 Location: Atlanta, GA Oddometer: 58	FS: R100GS Original Alternator & Bonus Original Bosch Flood Lights Upgraded my alternator to an Enduralast. Had a professional do it, and he returned a box with all the parts he took off. Never had an issue with the original. Everyone here seems to think I should keep it, but I just don't like keeping a bunch of stuff around. Especially since I move every year or two. So it's all for sale. Asking for $100 plus shipping. I'm in DC. You probably know what an alternator weighs and how big the box is. I'll throw in a pair of what are probably original GSPD flood lights (also working) made by Bosch if you want 'em. Obviously that'll make the box bigger. If you want to see a picture of all the parts, shoot me your email address and I'll do it tomorrow. If you have a pair of lightly used Sidi Discovery Rains, Size 44 please also let me know. Cheers Requisite ADV Emoticon:

05-30-2012, 01:39 PM	#56
Boxer_Bolshie n00b Joined: Apr 2012 Oddometer: 8	For Sale: R65 Left Side Battery Cover Black Was going to install this when I got the right side but have decided not to (the wife wants the money :( It's in excellent condition with only some very light scratches which should be able to be buffed out and some small paint chips off the bottom edge. I'm selling it on eBay for $75 but will sell to advrider.com members for $65 with free ship (within the lower 48 US), a little more for HI, AK and Canada. Sorry but I can only accept $ via Paypal. This will only fit the dual shock R65 and R45. I will Priority mail it via USPS unless HI, AK and Canada. You can shoot an email to me at twodeadpoets at gmail dot com for questions Thanks!

05-30-2012, 10:05 PM	#57
Boxer_Bolshie n00b Joined: Apr 2012 Oddometer: 8	R65 battery cover SOLD!

05-31-2012, 02:59 PM	#58
princess jamaica OLD DOG-NEW TRICKS Joined: Oct 2006 Location: KM111.5 POSADA CONCEPCION,BCS Oddometer: 1,964	R100rs crash bars wanted Since my sidestand gave way today,I'm looking for a set of crash bars."83 R100RS,full fairing(with new chips in the upper left). __________________ 24 hours,maybe 60 good years,it's really not that long a stay.........jimmy b.

05-31-2012, 08:35 PM	#59
Les_Garten Studly Adventurer Joined: Oct 2011 Location: PSL, FL Oddometer: 683	WTB SS Headers and Ohlins Monoshock I have a 92 Monoshock Looking for SS Headers, preferably Keihin in VGC to Mint. I have the H Pipe and the mufflers already. Also looking for VGC Ohlins Monoshock setup

06-01-2012, 09:00 AM	#60
bpeckm Grin! Joined: Apr 2008 Location: Road Island Oddometer: 4,429	Wanted for R80ST I am looking for a set of crashbars that will fit the 80ST.... black or chrome, probably prefer black. What is really need is the sidestand, so if someone has a clever way of doing that, I would love to hear about it. This bike is no raving beauty, so "patina" is very welcome, indeed! Muito obrigado! __________________ XS650 becomes a Vermont Backroader R60/6 gets caffeinated Portsmouth RI

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode