CJ Designs 950/990 Expedition Storage Box

[mototahoe]

Craig, put me in line for an SE fuel can , pleeeezzz.........

Cullen

[cjracer]

Originally Posted by ktm950se

Ooops, forgot to ask earlier:

Will the SE's box have the same dimensions as the ADV box, which was able to fit a partially stripped XT17 Warn winch as demonstrated in this thread, LINK.

If not, is the SE box bigger or smaller?

Lastly, has there been enough interest to make a dedicated Warn Winch box for the SE that wouldn't require a partial strip-down?

ktm950se

The SE and ADV tanks and storage boxes will start with the same Body, but will have different mounting points, so they are the same size.

At this time we are not making a WARN Winch box, until we can produce and re-design a test unit and have a list of interested customers.

If we can get 10 riders that want the WARN box, I'd be willing to put together a WARN Winch and BOX combo price.

Thanks.

[cjracer]

Originally Posted by mototahoe

Craig, put me in line for an SE fuel can , pleeeezzz.........

Cullen

You got it.

[ktm950se]

Hi again CJ,
While those of us interested in an Expedition Box for the WARN Winch patiently wait to see if there's enough collective interest to have you build them, in the alternative, can you post a pic of where the winch would mount on your SE rack using the appropriate Warn mounting plate. It'd be helpful to see the mounted location of the winch on the plate, so as to know how much area is left to support dry bags, etc.

I sent you a message via your website asking a similar question, but then thought others may be interested in knowing this information as well...

ktm950se

UPDATE: CJ has confirmed the winch mounts at the rear of the rack.

[ktm950se]

Hi CJ,
As we discussed, I'll take a Powder Coated Tank for my Super Enduro.

What size fuel line (ID) should I get to connect to the tank?

ktm950se

[ktm950se]

Greetings,
As CJ is out on an extended ride, does anyone else know what size fuel line (ID) I should get to attach to this Expedition tank?

Thanks!

ktm950se

[WIsixfitty]

Originally Posted by ktm950se

Greetings,
As CJ is out on an extended ride, does anyone else know what size fuel line (ID) I should get to attach to this Expedition tank?

Thanks!

ktm950se

I do know the tap has a 1/8" npt for the nipple.

I'm thinkin it may end up being the same as oem for the inside diameter.

I can't say for sure tho.

[Kendrick]

...

[cjracer]

Sorry for missing this ?

I've had no issues running off a 1/4" ID line on my SE test tank.

For Example.

The ADV cross over lines are 1/4".

Main feed is 5/16".

[ktm950se]

Got it, 1/4" ID fuel line it is!

I've also sourced some nice metal, bi-valved quick disconnects (with Viton O-rings) to make pulling both tanks, and the carbs, a simple and dry process.

QDs



ktm950se

[Narsisco Lopez]

Lookie, lookie!

[CharlieFox]

Are they all yours?

Do you want to sell one?

[ktm950se]

Super Nice boxes, but where are the tanks?

ktm950se

[Narsisco Lopez]

Originally Posted by CharlieFox

Are they all yours?

Do you want to sell one?

Yeah... I'm putting all 10 on my bike

CJ just sent me this photo yesterday as he knew I'd be salivating as I wait for my box to go to the power coater and then get shipped to me.

[CharlieFox]

[QUOTE=Narsisco Lopez;18989690]Yeah... I'm putting all 10 on my bike

Well you have damn near everything else on that bike

CJ: Are all of the storage boxes taken?