ADVrider

Go Back   ADVrider > Gear > Vendors
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

View Results: Definite Committed Interest in this bracket?
950 SE-R 18 13.95%
990, 950 ADV 111 86.05%
Voters: 129. You may not vote on this poll

Reply
 
Thread Tools Search this Thread Display Modes
Old 03-10-2012, 02:29 AM   #106
Peanuts
Beastly Adventurer
 
Peanuts's Avatar
 
Joined: Sep 2009
Location: UK
Oddometer: 1,477
Quote:
Originally Posted by pchGS View Post
Have to add Charlie worked with me to get the sidestand to me prior to my trip.

Comments:
Part is HEAVY and by that I mean that is a good deal. It's stout and should fend of any offenders that want to take a whack at that sidestand area. It fitted up 'PERFECTLY' even with the tighter tolerances that you've spec'd.

One comment to those mounting it up. Be sure to get the lower front bolt through the side stand bracket troqued to spec prior to bolting the mount plate up on the bike itself. There is no room to tighten the nyloc nut supplied due to lack of clearance on the casting for the stand. This isn't a problem nor a oversight on Charlie's part just the circumstances of the new superior strength nuts/bolts supplied.




BTW I have a Slaven's Racing Skid plate and there were no issues fitting it with that skid plate.

Good stuff, now off to Baja to test it out...

Thanks Charlie!
I used KTM nuts to match the rest of the bike. These have a smaller head so I did not have that problem :)
Peanuts is offline   Reply With Quote
Old 03-10-2012, 02:41 AM   #107
charlie264 OP
Beastly Adventurer
 
charlie264's Avatar
 
Joined: Oct 2007
Location: Blighty
Oddometer: 7,799
As long as you use loctite/thread lock no problem using the KTM nuts, I can’t source nylocks any smaller, nylocks are just easier in the field and less likely to come loose. This isn’t a problem if you torque the bolts using the allen heads in the countersunk’s and a spanner before you offer the plate up...as per instruction.
__________________
Beauty is truth and truth is beauty.
Charlie's Side Stand Relocator.

charlie264 screwed with this post 03-10-2012 at 02:51 AM
charlie264 is offline   Reply With Quote
Old 04-10-2012, 07:05 PM   #108
SauceSquatch
Gnarly Adventurer
 
SauceSquatch's Avatar
 
Joined: Aug 2011
Location: Austin, TX
Oddometer: 249
does anyone know the torque specs for the 10mm bold and 8mm bolts?
SauceSquatch is offline   Reply With Quote
Old 04-11-2012, 03:43 AM   #109
charlie264 OP
Beastly Adventurer
 
charlie264's Avatar
 
Joined: Oct 2007
Location: Blighty
Oddometer: 7,799
Quote:
Originally Posted by SauceSquatch View Post
does anyone know the torque specs for the 10mm bold and 8mm bolts?
All M10's are 45NM and M8 is 25NM
__________________
Beauty is truth and truth is beauty.
Charlie's Side Stand Relocator.
charlie264 is offline   Reply With Quote
Old 04-11-2012, 07:40 AM   #110
SauceSquatch
Gnarly Adventurer
 
SauceSquatch's Avatar
 
Joined: Aug 2011
Location: Austin, TX
Oddometer: 249
Quote:
Originally Posted by charlie264 View Post
All M10's are 45NM and M8 is 25NM
Thank you sir!
SauceSquatch is offline   Reply With Quote
Old 05-07-2012, 11:18 AM   #111
charlie264 OP
Beastly Adventurer
 
charlie264's Avatar
 
Joined: Oct 2007
Location: Blighty
Oddometer: 7,799
Got the latest batch in, orders were posted Saturday....
__________________
Beauty is truth and truth is beauty.
Charlie's Side Stand Relocator.
charlie264 is offline   Reply With Quote
Old 05-17-2012, 03:53 PM   #112
WoodbneK
Raisin AZ in AK
 
WoodbneK's Avatar
 
Joined: Aug 2008
Location: Wasilla Ak
Oddometer: 32
Installed mine today. It fits perfect and, it was easy to install. Just did a little Dremel toolin' to the frame on my 04 as required.

Peace of mind is a good thing. Great Product.

Thanks!
__________________
2004 KTM 950 ADV(Sold)
2007 KAW KLR-650(sold)
2009 KAW Super Sherpa
2012 Victory Vision
WoodbneK is offline   Reply With Quote
Old 07-03-2012, 08:28 AM   #113
charlie264 OP
Beastly Adventurer
 
charlie264's Avatar
 
Joined: Oct 2007
Location: Blighty
Oddometer: 7,799
Quote:
Originally Posted by WoodbneK View Post
Installed mine today. It fits perfect and, it was easy to install. Just did a little Dremel toolin' to the frame on my 04 as required.

Peace of mind is a good thing. Great Product.

Thanks!
Nice one. Thanks for the feedback, its on quite a few pre 05.5 bikes, any props just give us a shout.
__________________
Beauty is truth and truth is beauty.
Charlie's Side Stand Relocator.
charlie264 is offline   Reply With Quote
Old 07-17-2012, 12:30 AM   #114
etingelefunts
retem-odo
 
etingelefunts's Avatar
 
Joined: May 2012
Location: Southeastern U.S.
Oddometer: 812
Ready for one!

I've researched as many relocators as I can find, and this one looks like a winner.
PM sent, hoping you have some left.
Thanks
__________________
Less pondering. Simply march ahead, to the ends of this majestic planet.
etingelefunts is offline   Reply With Quote
Old 07-17-2012, 09:42 AM   #115
SauceSquatch
Gnarly Adventurer
 
SauceSquatch's Avatar
 
Joined: Aug 2011
Location: Austin, TX
Oddometer: 249
Quote:
Originally Posted by etingelefunts View Post
I've researched as many relocators as I can find, and this one looks like a winner.
PM sent, hoping you have some left.
Thanks
I did the relocator and skid plate, they are both quality items, I'm very happy with it.
SauceSquatch is offline   Reply With Quote
Old 07-17-2012, 10:27 AM   #116
etingelefunts
retem-odo
 
etingelefunts's Avatar
 
Joined: May 2012
Location: Southeastern U.S.
Oddometer: 812
Quote:
Originally Posted by SauceSquatch View Post
I did the relocator and skid plate, they are both quality items, I'm very happy with it.
Does he make a skid plate too?
I have the Weld86 installed. I also have the Weld86 relocator, which would be perfect if it were steel instead of aluminum. It continues forward and has an additional mount through a bushing to an unused hole in a very beefy portion of the case.
__________________
Less pondering. Simply march ahead, to the ends of this majestic planet.
etingelefunts is offline   Reply With Quote
Old 07-17-2012, 01:33 PM   #117
SauceSquatch
Gnarly Adventurer
 
SauceSquatch's Avatar
 
Joined: Aug 2011
Location: Austin, TX
Oddometer: 249
Quote:
Originally Posted by etingelefunts View Post
Does he make a skid plate too?
I have the Weld86 installed. I also have the Weld86 relocator, which would be perfect if it were steel instead of aluminum. It continues forward and has an additional mount through a bushing to an unused hole in a very beefy portion of the case.
http://www.weld86motoparts.com/KTM-950-990-ADV.html
SauceSquatch is offline   Reply With Quote
Old 07-21-2012, 05:39 AM   #118
charlie264 OP
Beastly Adventurer
 
charlie264's Avatar
 
Joined: Oct 2007
Location: Blighty
Oddometer: 7,799
Quote:
Originally Posted by SauceSquatch View Post
Not the same Charlie as Weld86, this has caused some confusion. My plate dosen't attach to the engine at all but still has five fixing points and is made from steel alloy not aluminium.
__________________
Beauty is truth and truth is beauty.
Charlie's Side Stand Relocator.
charlie264 is offline   Reply With Quote
Old 07-25-2012, 01:46 PM   #119
Grayspeed
Adventurer
 
Grayspeed's Avatar
 
Joined: Dec 2009
Location: Naarfolk
Oddometer: 15
One more for the thumbs up for Charlies sidestand relocator. Here in a day, fitted in a flash, looks and works the bizz. Nice one Chas!
Grayspeed is offline   Reply With Quote
Old 12-11-2012, 02:59 AM   #120
charlie264 OP
Beastly Adventurer
 
charlie264's Avatar
 
Joined: Oct 2007
Location: Blighty
Oddometer: 7,799
Quote:
Originally Posted by Grayspeed View Post
One more for the thumbs up for Charlies sidestand relocator. Here in a day, fitted in a flash, looks and works the bizz. Nice one Chas!
Cheers man.
__________________
Beauty is truth and truth is beauty.
Charlie's Side Stand Relocator.
charlie264 is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 01:14 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014