Airhead Flea Market Thread - Page 13

BLU HWY · 07-25-2012, 08:38 AM

Looking for a Sito muffler in reasonable shape.

Any other G/s farkles appreciated. R100GS tank?

Thanks,
John

Highside>Lowside · 07-27-2012, 01:00 PM

My first airhead, and already I have to get rid of it.

R75/6, Uploaded with Snapbucket (Original)

76 R75/6 80k mi, been sitting. Cranks over, compression weak in one cylinder. (Right,IIRC) Complete as shown, the other hard bag is included. Also has both side covers in vgc. Tank looks good. Clear title. I've got $850 in it. Comes with the beautiful fairing seen above. $850

Need room for a R1150GS project!

italiano · 07-28-2012, 08:03 AM

I need a set of r 100/7 80-84 nikasyl cylinders.

melville · 07-28-2012, 09:24 AM

Fehling 'Euro' bar. Fits the rider like so:

But does not work with '75 and later controls and bar end mirrors due to insufficient grip length:

In this condition, after use for mock-up and 150 break-in miles:

Ends lightly dressed to remove bulge that prevented the perches from sliding on.

$50US + shipping. PM to claim.

fsuitw · 07-28-2012, 01:22 PM

PM Sent.

aerone · 07-29-2012, 07:37 AM

Upstate, SC

I have a 1974 Yamaha 175 MX in decent running condition for $1500.00

I have a 1974 CZ Red Frame 380 has great compression and spark. I have not ridden it and have owned it for years. It does not have the aluminum tank. I have a red plastic 250 tank with it. This is a low hours bike. $1200.00

I am the second owner of both. Please pm me with your email address if you want pictures. Thanks...

85R80RT · 07-29-2012, 07:44 AM

Hey, does anybody know if a seat off a 1995 R100RT will fit my 1985 R80RT?
Thanks in advance for any hekp you might provide.

villageidiot · 07-29-2012, 10:32 AM

Quote:

Originally Posted by 85R80RT

Hey, does anybody know if a seat off a 1995 R100RT will fit my 1985 R80RT?
Thanks in advance for any hekp you might provide.

should fit with no problems

knary · 07-29-2012, 11:02 AM

1977 R100S pistons and cylinders.

$200+shipping.

crazydrummerdude · 07-30-2012, 06:07 AM

Wanted:
Mixture screws/springs for a Type 53 Bing on my R60/6.

Part #:
13 11 1 254 917
13 11 1 254 918

PM me.

hikerjohnson · 07-31-2012, 07:42 AM

**UPDATE** Got a seat now, now looking for the grabrail. See new fleamarket posting.

Looking for a rust-free seat pan or whole seat with the little turtleback for a 1978 R100/7. Ideally just a pan, but I'll think about a whole seat, just might have to count my pennies first.

My seat pan has rusted out by the hinge mountings.

hardwaregrrl · 07-31-2012, 03:11 PM

Broke mine at Rally WV. If you have a spare on the shelf, i'd love to give you money for it!

One Less Harley · 07-31-2012, 06:43 PM

Quote:

Originally Posted by BLU HWY

Looking for a Sito muffler in reasonable shape.

Any other G/s farkles appreciated. R100GS tank?

Thanks,
John

hope you can keep paint on it...I never could, even had it ceramic coated still surface rust. They do sound pretty good though. You'll need to double check welds on the foot peg mount.

coastranger · 08-01-2012, 04:41 PM

reluctant sale, so being a butt about it

http://corvallis.craigslist.org/mcy/3177915922.html

lightfighter · 08-01-2012, 07:52 PM

im putting together an S. I want the lower bars that i guess are the "euro bend".

Im open to buying BUT....

Ive got an RT(i think) bar... 4 1/2 inches of rise.

I've got these:

which i paid pretty good money for. they are 22mm, i cant read the manufacturers mark on them, Fueller, or something? I beieve they were made back in the day. They are straight, shiny, have some nicks and clamp scratches, and worked "real well" for what they are. Which turns out to be "not what I should have bought". I've never ridden anything with that sort of ride position(tucked), and it isn't my bag i guess.

First hope would be to trade the RT bars, and hold onto the drops just in case i change my mind and try again, but then again, I am pretty broke and would like to get this bike "done" (yes I am aware that "done" is a joke) as cheap as I can.

07-25-2012, 08:38 AM	#181
BLU HWY Guilty By-Stander Joined: Apr 2003 Location: Malfunction Junction, Oregon Oddometer: 777	WTB: Sito Muffler for R80 G/s? Looking for a Sito muffler in reasonable shape. Any other G/s farkles appreciated. R100GS tank? Thanks, John __________________ "When fun is outlawed only outlaws will have fun..." Rebel Skates BLU HWY screwed with this post 07-25-2012 at 11:29 PM Reason: tank

07-27-2012, 01:00 PM	#182
Highside>Lowside Hairier Than Thou Joined: Mar 2010 Location: ChiTown Oddometer: 833	My first airhead, and already I have to get rid of it. 76 R75/6 80k mi, been sitting. Cranks over, compression weak in one cylinder. (Right,IIRC) Complete as shown, the other hard bag is included. Also has both side covers in vgc. Tank looks good. Clear title. I've got $850 in it. Comes with the beautiful fairing seen above. $850 Need room for a R1150GS project! __________________ 1977 TT500- Old's Cool. 1995 620 RXC- Make my Kool Aid Grape, please. 1982 FT500- Moar Thumper 2000 M900- My new Italian Lover Now with more Honda Sabrey GoodNess (IBA SS1000 Approved)

07-28-2012, 08:03 AM	#183
italiano Gnarly Adventurer Joined: Nov 2008 Location: South of the border Oddometer: 165	Wtb:nikasyl cylinder I need a set of r 100/7 80-84 nikasyl cylinders.

07-28-2012, 09:24 AM	#184
melville Studly Adventurer Joined: Jun 2010 Location: Behind the Redwood Curtain Oddometer: 877	Handlebar for /5 and earlier, it seems Fehling 'Euro' bar. Fits the rider like so: But does not work with '75 and later controls and bar end mirrors due to insufficient grip length: In this condition, after use for mock-up and 150 break-in miles: Ends lightly dressed to remove bulge that prevented the perches from sliding on. $50US + shipping. PM to claim. __________________ Call me Mel. Some years ago- never mind how long precisely- having little or no money in my purse, and nothing particular to interest me at home, I thought I would ride about a little and see the other parts of the world. It is a way I have of driving off the spleen and regulating the circulation.

07-29-2012, 07:37 AM	#186
aerone Gnarly Adventurer Joined: Oct 2005 Location: Hwy 28 South Carolina Oddometer: 256	Two Smokers For Sale Upstate, SC I have a 1974 Yamaha 175 MX in decent running condition for $1500.00 I have a 1974 CZ Red Frame 380 has great compression and spark. I have not ridden it and have owned it for years. It does not have the aluminum tank. I have a red plastic 250 tank with it. This is a low hours bike. $1200.00 I am the second owner of both. Please pm me with your email address if you want pictures. Thanks...

07-28-2012, 01:22 PM	#185
fsuitw n00b Joined: Jun 2012 Location: Tempe, AZ Oddometer: 8	PM Sent.

07-29-2012, 07:44 AM	#187
85R80RT n00b Joined: Jul 2012 Oddometer: 2	R100RT Seat Hey, does anybody know if a seat off a 1995 R100RT will fit my 1985 R80RT? Thanks in advance for any hekp you might provide.

07-29-2012, 11:02 AM	#189
knary sunshine and puppies Joined: Jun 2002 Location: portland, or Oddometer: 28,982	1977 R100S pistons and cylinders. $200+shipping. __________________ Go Jane Go - Analog Jane and her three chamber heart www.scottconary.com \| Oil & Piston : Motorcycle paintings and prints \| The Punk's Bike

07-30-2012, 06:07 AM	#190
crazydrummerdude Wacky Bongo Boy Joined: Nov 2006 Location: Moore/OKC Oddometer: 6,910	Wanted: Mixture screws/springs for a Type 53 Bing on my R60/6. Part #: 13 11 1 254 917 13 11 1 254 918 PM me. __________________ 1974 BMW R75/6, 1974 BMW R90/6, 1969 BMW R60/2 hack, 1929 Ford Model A, Metal casting, Part 2/Part 1 among others..

07-31-2012, 07:42 AM	#191
hikerjohnson Adventurer Joined: Apr 2011 Location: Southern Maine Oddometer: 22	Wanted: /7 Seat UPDATE Got a seat now, now looking for the grabrail. See new fleamarket posting. Looking for a rust-free seat pan or whole seat with the little turtleback for a 1978 R100/7. Ideally just a pan, but I'll think about a whole seat, just might have to count my pennies first. My seat pan has rusted out by the hinge mountings. __________________ Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles. — HST '78 R100/7 hikerjohnson screwed with this post 08-12-2012 at 07:04 AM Reason: got most of what I needed

07-31-2012, 03:11 PM	#192
hardwaregrrl Shit for brains Joined: Jan 2006 Location: Atlanta Oddometer: 4,866	Rear Brake switch???? Anybody have one??? Broke mine at Rally WV. If you have a spare on the shelf, i'd love to give you money for it! __________________ Trans Lab RR-broke down in Ontario-2 stroke fun for 200 bucks- TCAT R100 GS racks For Sale My life aboard an R80ST

08-01-2012, 04:41 PM	#194
coastranger Gnarly Adventurer Joined: Jun 2009 Location: coast range oregon Oddometer: 430	reluctant sale, so being a butt about it http://corvallis.craigslist.org/mcy/3177915922.html

08-01-2012, 07:52 PM	#195
lightfighter where does this go? Joined: Dec 2007 Location: Sierra Vista AZ. Oddometer: 1,889	looking for low, S, or 'euro' bars... im putting together an S. I want the lower bars that i guess are the "euro bend". Im open to buying BUT.... Ive got an RT(i think) bar... 4 1/2 inches of rise. I've got these: which i paid pretty good money for. they are 22mm, i cant read the manufacturers mark on them, Fueller, or something? I beieve they were made back in the day. They are straight, shiny, have some nicks and clamp scratches, and worked "real well" for what they are. Which turns out to be "not what I should have bought". I've never ridden anything with that sort of ride position(tucked), and it isn't my bag i guess. First hope would be to trade the RT bars, and hold onto the drops just in case i change my mind and try again, but then again, I am pretty broke and would like to get this bike "done" (yes I am aware that "done" is a joke) as cheap as I can.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode