|07-29-2012, 11:53 PM||#1|
Joined: Jul 2005
Location: Capital Canberra
A Plastic Glue
I purchased some tank protectors from Touratech so my seat bag straps won't mark the edges of the tank panels.
They came with a tube of glue which looked and smelt like silicone sealant.
But when I used it as recommended the tank protectors just slid straight off.
I put them back in place and held them with tape for 24 hours but I could still easily remove them, so I gave up with that idea.
Any suggestions for a suitable glue which won't eat plastic?
Also it has to be able to fill the void between the tank protectors and the body panel, as the aren't a snug fit.
"Love is the condition in which the happiness of another person is essential to your own." Jubal Harshaw
|Thread Tools||Search this Thread|