Go Back   ADVrider > Bikes > Thumpers
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 09-01-2012, 12:22 PM   #1
gettinold OP
Joined: Feb 2012
Location: Indiana
Oddometer: 5
Lc4 640 Extremely stuck choke plunger

Hello, anyone have tips on removing a brass choke plunger that's stuck tight in the carb..... Ok I have a 2000 KTM Lc4-e 640 with 9900 hundred miles. Problem is the choke cable broke right where it connects to the brass plunger or what-ever it's called inside the carb. I've soaked it daily with wd-40 with absolutely no effect. Currently the plunger is all beat up from attempts to pull it out and now there is nothing to grab hold of to get it out. My next step was going to be drill and tap the plunger and try screwing a bolt in to have something to pull the plunger out with. But I wanted to see how others have gone about this removal task. Appreciate any tips. Thank you......
gettinold is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 07:25 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015