|10-24-2012, 09:24 AM||#1|
Joined: Oct 2012
Location: Eugene, OR
Billet LED light bars
These light bars are my latest creation.
Machined from solid 6061-T6 aluminum in house
7.875"wide,1.875"tall, 3"deep 2.8LBS Anodized black
6 Cree XM-L LT5 5000k LEDS
Reverse battery protection
Thermal protection at 158°F 70°C
Abrasion Resistant Polycarbonate lens
Lights are made in house in the USA
High, Low and strobe modes accessed from a single ground momentary switch.
Standard hook up is connecting the power and ground directly to your battery and the mode wire turns it on/off selects modes.
Light will turn on high when power is hooked up. Use this option if you want to wire the light to a relay and power it from switch like your high beams.
Lights will come with brackets of your choice: Weld on flat, Weld on 1.75" tube, 304 stainless L
Light comes with 10ft of wire. You will need to provide a fuse and switch.
On my Drz400 I have it hooked to the battery and use my old push button kill switch to turn on the light. This light makes night riding fun
RyDel Fab Led light bar operation - YouTube
Bigtoy302 screwed with this post 10-08-2013 at 06:33 PM
|Thread Tools||Search this Thread|