R100GS Build - Australia - Page 5

igormortis · 10-29-2012, 09:26 PM

Very nice! What front hub/wheel is that?

gsd4me · 10-29-2012, 09:55 PM

Front wheel is a 21x1.8 Excel, not too sure what the hub is. When Ray went to the wheel builders he told them what he needed and they gave him what they had that would do the job. They use different brands depending on what the customer wants; he thinks it is a Rad (?) brand.

Rear wheel is standard R100GS tubeless rim w/- tube, as the Mitas E07 doesn`t come in tubeless for that size.

Fairing/dash wobble has been fixed, will try to remember to get piccy next week.

igormortis · 10-30-2012, 12:35 AM

I thought I'd read that the E07 is available as tubeless. Is that only as a 140 section tyre?

gsd4me · 10-30-2012, 01:04 AM

Quote:

Originally Posted by igormortis

I thought I'd read that the E07 is available as tubeless. Is that only as a 140 section tyre?

Tubeless E07 is available for the big chookies, Oilhead GS, V Strom etc. People were using slightly smaller E07`s with a tube, which worked OK, so Mitas decided to make the correct size for them.

ms-oz · 11-01-2012, 06:05 PM

it's the RRRRRRRRR100GSPD Spy Parrot from ADVrider to check on the progress!

Stagehand · 11-01-2012, 06:57 PM

my kingdom for a garage as nice as that

gsd4me · 11-01-2012, 10:28 PM

If I panned over to the left a bit we would see a turbocharged/fuel injected R90S, an R80 G/S PD w/- 1000cc power up kit in the foreground, plus a couple of Ray`s much earlier specials in the background. In another room sits Ray`s latest finished special, a 1070cc monoshock w/- K front end and spoke wheels.

Airhead Wrangler · 11-01-2012, 10:39 PM

Quote:

Originally Posted by GSD4ME

If I panned over to the left a bit ...

Then pan to the left, dammit.

gsd4me · 11-01-2012, 10:57 PM

I`ve given up trying to put pics up on this site, so Mike is taking them from a Facebook page. Maybe Mike wants to tell us what engine he is about to buy for a special he is building.

http://www.facebook.com/groups/AirheadsAustralia/

ms-oz · 11-02-2012, 04:20 AM

Quote:

Originally Posted by GSD4ME

I`ve given up trying to put pics up on this site, so Mike is taking them from a Facebook page. Maybe Mike wants to tell us what engine he is about to buy for a special he is building.

http://www.facebook.com/groups/AirheadsAustralia/

me,me no english

gsd4me · 11-02-2012, 04:42 AM

Quote:

Originally Posted by ms-oz

me,me no english

ms-oz · 11-02-2012, 06:44 PM

The idea in my f... up head is the antithesis to that beemer ridden by a Bull (where I'm from pigs are Bullen)

Stagehand · 11-02-2012, 06:52 PM

Quote:

Originally Posted by ms-oz

me,me no english

gsd4me · 11-03-2012, 12:24 AM

Quote:

Originally Posted by ms-oz

The idea in my f... up head is the antithesis to that beemer ridden by a Bull (where I'm from pigs are Bullen)

I think the engine block for mine is from one of those.

gsd4me · 11-03-2012, 01:08 AM

Quote:

Originally Posted by FR700

link takes me to a log in page ...

pic's , any easier and it would be illegal , straight link from your avatar ... two clicks

.

Left or right click?.....then what?

10-29-2012, 09:26 PM	#61
igormortis Beastly Adventurer Joined: Dec 2006 Location: Wellington, New Zealand Oddometer: 1,082	Very nice! What front hub/wheel is that? __________________ Operation: Battle Panda

10-29-2012, 09:55 PM	#62
gsd4me ^OP unconditional love Joined: Dec 2005 Location: Brisbane, Australia Oddometer: 5,602	Front wheel is a 21x1.8 Excel, not too sure what the hub is. When Ray went to the wheel builders he told them what he needed and they gave him what they had that would do the job. They use different brands depending on what the customer wants; he thinks it is a Rad (?) brand. Rear wheel is standard R100GS tubeless rim w/- tube, as the Mitas E07 doesn`t come in tubeless for that size. Fairing/dash wobble has been fixed, will try to remember to get piccy next week. __________________ David Hunn: R100GS Ray Peake special. http://www.advrider.com/forums/showt...uild+australia gsd4me screwed with this post 11-03-2012 at 04:35 AM

10-30-2012, 12:35 AM	#63
igormortis Beastly Adventurer Joined: Dec 2006 Location: Wellington, New Zealand Oddometer: 1,082	I thought I'd read that the E07 is available as tubeless. Is that only as a 140 section tyre? __________________ Operation: Battle Panda

11-01-2012, 06:05 PM	#65
ms-oz Mike Joined: Dec 2011 Location: Perth WA Oddometer: 63	RRRRRRRRR100GSPD Spy Parrot it's the RRRRRRRRR100GSPD Spy Parrot from ADVrider to check on the progress!

11-01-2012, 06:57 PM	#66
Stagehand +/- V TDSPP Joined: Oct 2004 Location: "Poughkeepsie?!?!" Oddometer: 19,910	my kingdom for a garage as nice as that __________________ What to do... What to do...

11-01-2012, 10:28 PM	#67
gsd4me ^OP unconditional love Joined: Dec 2005 Location: Brisbane, Australia Oddometer: 5,602	If I panned over to the left a bit we would see a turbocharged/fuel injected R90S, an R80 G/S PD w/- 1000cc power up kit in the foreground, plus a couple of Ray`s much earlier specials in the background. In another room sits Ray`s latest finished special, a 1070cc monoshock w/- K front end and spoke wheels. __________________ David Hunn: R100GS Ray Peake special. http://www.advrider.com/forums/showt...uild+australia

11-01-2012, 10:57 PM	#69
gsd4me ^OP unconditional love Joined: Dec 2005 Location: Brisbane, Australia Oddometer: 5,602	I`ve given up trying to put pics up on this site, so Mike is taking them from a Facebook page. Maybe Mike wants to tell us what engine he is about to buy for a special he is building. http://www.facebook.com/groups/AirheadsAustralia/ __________________ David Hunn: R100GS Ray Peake special. http://www.advrider.com/forums/showt...uild+australia

11-02-2012, 06:44 PM	#72
ms-oz Mike Joined: Dec 2011 Location: Perth WA Oddometer: 63	The idea in my f... up head is the antithesis to that beemer ridden by a Bull (where I'm from pigs are Bullen)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode