|11-06-2012, 04:58 PM||#1|
Joined: Jun 2007
Location: Knoxville, TN
Voltage of the Low Octane Wire
I currently have a waterproof switch to activate the low octane map on my bike instead of disconnecting the wires. Only problem is the only waterproof switch I could find was a push button. I can't tell when the thing is pushed or not because it resets to the same position.
I want to wire it to a Highway Dirt Bikes handle bar clamp set up so my questions are:
1) Are the HDB buttons set up so that it is very clear if the button has been pushed or not?
2) Is there a way to wire it so that when it is activated it lights up the small LEDs that you can get with the kit?
I know I could just wire it so that I unplug the wire like stock, but what fun would that be?
Those who dance are considered crazy by those who do not hear the music.
I am not the same having seen the moon shine on the other side of the world. - Radmacher
5 Cylinders vs. Moab..........My East Tennessee.........Internships may go to Hell and I will go to Alaska
|Thread Tools||Search this Thread|