ADV Kids - Page 7

enduro-ince · 04-14-2012, 01:31 PM

So we got the OSET all charged up and snuck in a ride this morning before the snow came. I ziptied the foot pegs up to start. She is used to that form from the Strider. Aven cant flat foot both sides on the OSET so its just barely small enough for her. I figured it would be later in the summer before she was really ready but we went over to the park and hit the grass right away. She was timid at first and the bumpy grass was causing issues so we moved onto the pavement, after about five minutes she could balance and hold her feet up as long as she wanted. I then dropped the pegs and she put her feet right up there and that was that. This vid is about twenty to thirty minutes into her first dirt bike!! She's pretty amped up. see what I did there?

NMTrailboss · 04-14-2012, 01:41 PM

Total WIN Tom!! Awesome!

Yellow Pig · 04-14-2012, 01:43 PM

Awsome!

pappa_j · 04-15-2012, 06:59 AM

http://youtu.be/x-PRaDiTt-s

pappa_j · 04-17-2012, 08:08 PM

Coloradical · 04-17-2012, 09:09 PM

Reminds me of this:

bigtex · 05-07-2012, 08:32 AM

Fun day Sunday blasting along Bunce School road under crystal clear skies.

Not 100% ATGATT as LittleTex has outgrown his riding boots - again.

ktmdoc · 05-15-2012, 09:35 AM

I just picked up a KDX 50 and it has a training wheel setup which is from Haul Master. It is a single axle with two mounting bars at right angles which appear would attach to the foot peg bars but it did not have any other hardware. Before I start to re invent the wheel I am asking for any suggestions on the best way to attach this. Thanks

Pablo83 · 05-15-2012, 11:47 AM

Quote:

Originally Posted by ktmdoc

I just picked up a KDX 50 and it has a training wheel setup which is from Haul Master. It is a single axle with two mounting bars at right angles which appear would attach to the foot peg bars but it did not have any other hardware. Before I start to re invent the wheel I am asking for any suggestions on the best way to attach this. Thanks

You've got it right, they usually attach to the foot peg brackets and nothing else.

ktmdoc · 05-15-2012, 06:01 PM

That's what I thought but thanks for the confirmation.

ktmdoc · 05-16-2012, 07:38 AM

Ok and now for the next question. This bike has been sitting for over a year and I have changed the plug, gas and cleaned the carb. It runs poorly at my altitude 9,300 ft and I would like any suggestions from anyone on jetting. Thanks

Pablo83 · 11-13-2012, 10:58 AM

I think they're 7.5, but the tags are so worn out I can't read them anymore.

They are not quite as dirty as they appear in the pic.

HellSickle · 11-13-2012, 12:34 PM

Quote:

Originally Posted by Pablo83

I think they're 7.5, but the tags are so worn out I can't read them anymore.

They are not quite as dirty as they appear in the pic.

FYI, if anyone has kid gear that needs a home, I'm happy to act as a collection site for Larimer county NYPUM.

I'll be up in Woodland Park next week.

Pablo83 · 11-13-2012, 01:02 PM

Quote:

Originally Posted by HellSickle

FYI, if anyone has kid gear that needs a home, I'm happy to act as a collection site for Larimer county NYPUM.

I'll be up in Woodland Park next week.

I'd be happy to give them to NYPUM. Let me know where to drop them off.

GSL · 11-15-2012, 06:05 PM

Quote:

Originally Posted by Pablo83

I'd be happy to give them to NYPUM. Let me know where to drop them off.

Hi Paul,

I'll be up there with Hellsickle, staying Thanksgiving morning thru Saturday afternoon. We'll be staying at the Country Lodge, next to City Market. Riding 717 area on Friday and Saturday morning, and can hook up anytime during that timeframe. If that doesn't work for you, let us know, and we can make other arrangements.

Cheers,
Will

04-14-2012, 01:41 PM	#92
NMTrailboss Team Dead End Joined: Mar 2008 Location: Albuquerque, NM Oddometer: 4,454	Total WIN Tom!! Awesome! __________________

04-14-2012, 01:43 PM	#93
Yellow Pig Allergic to Asphalt! Joined: Oct 2004 Location: Colorado Oddometer: 5,992	Awsome! __________________ So Many Idiots, So Few Comets!!!!!!!!!

04-15-2012, 06:59 AM	#94
pappa_j Studly Adventurer Joined: Mar 2011 Location: Farmington, New Mexico (Four Corners Area) Oddometer: 660	version 2.3 http://youtu.be/x-PRaDiTt-s

04-17-2012, 09:09 PM	#96
Coloradical Studly Adventurer Joined: Jul 2007 Location: Fort Collins, CO Oddometer: 931	Reminds me of this: __________________ '06 KTM 450EXC-G '05 KTM 950Adv

05-07-2012, 08:32 AM	#97
bigtex Rocky Mountain High Joined: Feb 2006 Location: Northern Colorado Oddometer: 467	Fun day Sunday blasting along Bunce School road under crystal clear skies. Not 100% ATGATT as LittleTex has outgrown his riding boots - again. __________________

04-14-2012, 01:31 PM	#91
enduro-ince dirtslave Joined: Jul 2004 Location: Placerville Co. Oddometer: 4,283	So we got the OSET all charged up and snuck in a ride this morning before the snow came. I ziptied the foot pegs up to start. She is used to that form from the Strider. Aven cant flat foot both sides on the OSET so its just barely small enough for her. I figured it would be later in the summer before she was really ready but we went over to the park and hit the grass right away. She was timid at first and the bumpy grass was causing issues so we moved onto the pavement, after about five minutes she could balance and hold her feet up as long as she wanted. I then dropped the pegs and she put her feet right up there and that was that. This vid is about twenty to thirty minutes into her first dirt bike!! She's pretty amped up. see what I did there?

04-17-2012, 08:08 PM	#95
pappa_j Studly Adventurer Joined: Mar 2011 Location: Farmington, New Mexico (Four Corners Area) Oddometer: 660

05-15-2012, 09:35 AM	#98
ktmdoc Gnarly Adventurer Joined: Nov 2009 Location: conifer co Oddometer: 267	Training wheels I just picked up a KDX 50 and it has a training wheel setup which is from Haul Master. It is a single axle with two mounting bars at right angles which appear would attach to the foot peg bars but it did not have any other hardware. Before I start to re invent the wheel I am asking for any suggestions on the best way to attach this. Thanks __________________ 04 KTM 450 MXC plated 01 CR 250 light and fast 03 Beta 250 when I'm tired 03 600 Katana 01 KTM 200 exc wifes plated

05-15-2012, 06:01 PM	#100
ktmdoc Gnarly Adventurer Joined: Nov 2009 Location: conifer co Oddometer: 267	That's what I thought but thanks for the confirmation. __________________ 04 KTM 450 MXC plated 01 CR 250 light and fast 03 Beta 250 when I'm tired 03 600 Katana 01 KTM 200 exc wifes plated

05-16-2012, 07:38 AM	#101
ktmdoc Gnarly Adventurer Joined: Nov 2009 Location: conifer co Oddometer: 267	Ok and now for the next question. This bike has been sitting for over a year and I have changed the plug, gas and cleaned the carb. It runs poorly at my altitude 9,300 ft and I would like any suggestions from anyone on jetting. Thanks __________________ 04 KTM 450 MXC plated 01 CR 250 light and fast 03 Beta 250 when I'm tired 03 600 Katana 01 KTM 200 exc wifes plated

11-13-2012, 10:58 AM	#102
Pablo83 Sleep, Wrench, Ride Joined: Aug 2008 Location: Woodland Park, CO Oddometer: 4,445	Free kids boots I think they're 7.5, but the tags are so worn out I can't read them anymore. They are not quite as dirty as they appear in the pic. __________________ Bikes: DR350 \| GR650 Street Tracker \| NX650 Turbo \| Catamount Cycles Events: 2013 Monkey-Butt 500 \| BreckTrek 2013

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode