|
11-15-2012, 03:32 PM
|
#1 |
|
Boxer Pilot
Joined: May 2005
Location: Upstate South Carolina
Oddometer: 226
|
Sargent Seat Cover?
Thinking about getting a Sargent replacement seat cover and replacement foam for my 78 R100S seat with the S cowling. The original is looking kinda rough. Has anyone here done this? If so how did it turn out and how difficult was the job?
Cheers Steve
__________________
"Never say Never" |
|
|
|
11-15-2012, 05:26 PM
|
#2 |
|
Spudly Adventurer
Joined: Jan 2005
Location: Riding with my pal Richard Cranium
Oddometer: 3,272
|
I bought a replacement cover and foam from them, exact match to the old stock cover. I would buy another if needed, good quality stuff. You can see it towards the end of my build thread in my sig below.
Mike
__________________
Cogswell Rides To Big Bend See my airhead project here Time Warp Vintage Motorcycle Club The good thing is, your damn motor can't read. If it says oil on the container, it's pretty much OK to dump in there.... ED. |
|
|
|
|
11-16-2012, 03:06 PM
|
#3 |
|
Boxer Pilot
Joined: May 2005
Location: Upstate South Carolina
Oddometer: 226
|
Thanks for the info. I'll probably tackle the job this winter with the Sargent cover and new foam.
Here's a pic of the old girl with the Alaska sheep skin from my GS to cover up the seat. Cheers Steve     
__________________
"Never say Never" Steve W. screwed with this post 11-16-2012 at 03:33 PM |
|
|
|
|
11-16-2012, 05:09 PM
|
#4 | |
|
Spudly Adventurer
Joined: Jan 2005
Location: Riding with my pal Richard Cranium
Oddometer: 3,272
|
Quote:
Mike
__________________
Cogswell Rides To Big Bend See my airhead project here Time Warp Vintage Motorcycle Club The good thing is, your damn motor can't read. If it says oil on the container, it's pretty much OK to dump in there.... ED. |
|
|
|
|
 |
| Share |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
