Rallye navigation bracket photo thread

[Carlos M]

Originally Posted by 640 Armageddon

Quick question. The decomp cable. Do we really really need it ?

I do use mine all the time to set the kick into position. My 640 starts so easy on the kick that I use it most often than the electric starter

[michael1968]

Originally Posted by 640 Armageddon

Grommets I have beneath the RB for example. Because of the way the Nav Tower plates hold each other I need rubber washers, which I can cut from rubber sheet but if I can find them straight away I will buy them. I think If I use washers in all the connections, eventually what you do it you dampening out the thing because some of the energy will go to the washers . The best place to do it obviously would be the connection to the frame but I have not time now to take it off as I need to prepare other things on the bike ...

You can use the seals that are used in water taps as washers, check out your local hardware store. There are a few different types, I use the harder black ones.

[2bold2getold]

Originally Posted by 640 Armageddon

Grommets I have beneath the RB for example. Because of the way the Nav Tower plates hold each other I need rubber washers, which I can cut from rubber sheet but if I can find them straight away I will buy them. I think If I use washers in all the connections, eventually what you do it you dampening out the thing because some of the energy will go to the washers . The best place to do it obviously would be the connection to the frame but I have not time now to take it off as I need to prepare other things on the bike ...

These might work. Kind of a reverse grommet. IIRC 1971 and later air cooled VW Beetle oil cooler seals.

http://www.partsgeek.com/gbproducts/...FZGPPAoddxgAlw

[Brodovitch]

Originally Posted by 640 Armageddon

Question for the NavTower. Anybody has a good source for rubber washers ?

Markoutsas on Leoforos Athinon (underneath the overpass on your right)

PM or call, I have a bunch of spares as well

[640 Armageddon]

Originally Posted by Brodovitch

Markoutsas on Leoforos Athinon (underneath the overpass on your right)

PM or call, I have a bunch of spares as well

Goody goody goody

Yesterday we put the finishing touches on the thing, mainly the cabling and the numbering ...








The trained eye will notice the spare gear, brake and clutch levers ... Behind the screen I will hide the emergency kit and on the other side (the left one ) some tools and other spares... All in all I am happy with the result, I dont think there will be anything in there that would result in me going home early in the 24 Hrs race but that remains to be seen on Saturday...

[Carlos M]

Originally Posted by 640 Armageddon

I dont think there will be anything in there that would result in me going home early in the 24 Hrs race but that remains to be seen on Saturday...

...only the crappy Touratech roadbook holder

...not to jinx you but you know how they perform.

[tehdutchie]

On the rubber side of things.. What do you call these in English?



I cannot find the right one here locally (holland) so want to google them abroad.




Looking for this size;

D=12mm
H2=2mm but not too critical
FH=22mm
OD=29mm
H=15mm

Anyone got an English name and ŵebshop where i might find these? I need a few for some fairings im having made for my RXV.

[crankshaft]

Originally Posted by tehdutchie

On the rubber side of things.. What do you call these in English?



I cannot find the right one here locally (holland) so want to google them abroad.




Looking for this size;

D=12mm
H2=2mm but not too critical
FH=22mm
OD=29mm
H=15mm

Anyone got an English name and ŵebshop where i might find these? I need a few for some fairings im having made for my RXV.

Grommet

[HogWild]

McMaster-Carr:
http://www.mcmaster.com/#push-in-grommets/=k9i833
They don't seem to have metric sizes, but you can probably find an inch version that fits ok.

[Carlos M]

Originally Posted by tehdutchie

Anyone got an English name and ŵebshop where i might find these? I need a few for some fairings im having made for my RXV.

farnell: http://tinyurl.com/cbxyzor

Some of the products don't stock in Europe, beware of the Newark Direct Shipping (expensive!)

[640 Armageddon]

Originally Posted by tehdutchie

Anyone got an English name and ŵebshop where i might find these? I need a few for some fairings im having made for my RXV.

http://www.thetoolboxshop.com/index.asp?function=search

http://www.autoelectricsupplies.co.u...ommets&x=0&y=0

I have used both sites and they are quite fast

[Brodovitch]

Originally Posted by 640 Armageddon

Goody goody goody

Yesterday we put the finishing touches on the thing, mainly the cabling and the numbering ...

The trained eye will notice the spare gear, brake and clutch levers ... Behind the screen I will hide the emergency kit and on the other side (the left one ) some tools and other spares... All in all I am happy with the result, I dont think there will be anything in there that would result in me going home early in the 24 Hrs race but that remains to be seen on Saturday...

Well someone sure noticed them at scrutineering yesterday....

What a joke ha ha, see you on Friday I guess.

(Oh, and the cable numbering is making me drool all over my keyboard you bastard)

[640 Armageddon]

Originally Posted by Brodovitch

(Oh, and the cable numbering is making me drool all over my keyboard you bastard)

The weirdo told me to remove the tools from the tower ... Good lord ...
The only bike that had the flare, the blanket an emergency kit for the bike and the rider ... At least he did not tell me to remove these kits from the bike... For all I know he could have told me to eat the pills from the emergency kit before the race in order not to have them on the tower, hahahaha

As far as the numbering is concerned, I know where you live , I have spare numbers, I come there, you give me coffee and we prepare yours as well

[Pete640]

Ok
So when do you start on the 950 version?

[640 Armageddon]

Originally Posted by Pete640

Ok
So when do you start on the 950 version?

After the 24 hrs race which is on Saturday GimmE a week to recover ... Of course I don't think I will pass the scrutineering with the people we are dealing there so I may spend the weekend in the cinemas watching the latest James Bond film, I ve heard it has some bike chases

I have a friend with a 990, Angelo if you have anyone who does not use it and want to give it in order to take measurements for a Nav Tower, help us out here , we will then build a tower for your 450 . I will seek that the 990 keeps the original clocks minus the rev counter and that it has space for a couple if IMOs / ICOs ...
The problem is that I need the bike naked for quite some time because of the everyday job

Pete, you also have a fairing that is more vertical for the 950/990 ? That would help with the spacing of the Nav Tower