XR650R owners.

[scottyoffroad]

Originally Posted by jm-2008

Anyone know of an OEM style aftermarket replacement for the headlight on our Oz XRR's
Not all that keen to pay what the shops are asking, have had two broken by rocks and one from water on the reflector.

Also replacement side covers

Any (reasonable) suggestion/information will be appreciated.

Many thanks,

JM

Pretty sure the headlight is the same as an XR400... in which case just about any bike shop should be able to get an aftermarket one through Motorcycle Specialties.... Should just bolt straight in.

Cheers Scotty

[KASUYAHO]

Originally Posted by poppy

Hi mate, i am up to the part were my pockets become lighter. So while i am waiting for parts, i might pull the brakes apart and clean them up, change wheel bearings etc and fix up the missing spoke.

A good going over and it will be like brand new good stuff

[KASUYAHO]

Originally Posted by ditchwitch650

I have finally finished my restoration rebuild, I'm very happy with how it come up

I decided to sell it as 1 coan only have so many bikes, I hope to new owner gets as much enjoyment out of it as i have!

It came up great Ditchy, credit to you

[KASUYAHO]

Originally Posted by jm-2008

Anyone know of an OEM style aftermarket replacement for the headlight on our Oz XRR's
Not all that keen to pay what the shops are asking, have had two broken by rocks and one from water on the reflector.

Also replacement side covers

Any (reasonable) suggestion/information will be appreciated.

Many thanks,

JM

Betta Bikes sells a headlight replacement that takes a QH lamp with the same mounting points as stock.

Google servicehonda ( there in the USofA ) there parts are 1/3 of the cost of OEM bits here.

[digga1111]

Originally Posted by jm-2008

Anyone know of an OEM style aftermarket replacement for the headlight on our Oz XRR's
Not all that keen to pay what the shops are asking, have had two broken by rocks and one from water on the reflector.

Also replacement side covers

Any (reasonable) suggestion/information will be appreciated.

Many thanks,

JM

http://www.rallylights.com/SearchRes...CategoryID=364

[jm-2008]

Originally Posted by digga1111

http://www.rallylights.com/SearchRes...CategoryID=364

Thanks for the tip Digga,
Found a lamp at an Auto parts supplier here in Melb similar to those in the link.
Cut out the OEM item from a spare housing and with a lot of fiddling managed to get it to fit and glued it in with SIKAFLEX.
Spacing is an issue as it protrudes a lot further forward than the OEM and is not a nice fit in the original headlight surround/number plate assembly.
That said it takes halogen 35W bulbs so is a vast improvement.

JM

[ditchwitch650]

Originally Posted by ZXRaziel

Dont sell it Ditch , you will regret it .

I really don't want too i have had this bike over 8 years and had more great rides then i can say on it, it has never let me down only major issue was snapping the R/h footpeg off landing a table top jump @ green park connondale,

but i have another XR650R modded with crf suspension and may other mods as well as a crf450r I am also planning to do a project / custom build on a crf450x with CR500 engine and get adr approved very soon

[QUOTE=jm-2008;20143706]

Originally Posted by ditchwitch650

Very nice/clean looking XR

Any reason it's parked in a doctors carpark?

i have a very steep driveway and nowhere to take good pics of the bike and this c/park is 400m from my house and the nurses

[WILL_S]

xr650 dragster
pretty eh

[johnno950]

Originally Posted by KASUYAHO

Betta Bikes sells a headlight replacement that takes a QH lamp with the same mounting points as stock.

Google servicehonda ( there in the USofA ) there parts are 1/3 of the cost of OEM bits here.

What are servicehonda like to deal with if chasing 650r parts?,see they got a oz distributer so do they make you deal with them?.Nice s/hand bikes on the s/honda website.

[Lostsaffa]

Originally Posted by ditchwitch650

I have finally finished my restoration rebuild, I'm very happy with how it come up

I decided to sell it as 1 coan only have so many bikes, I hope to new owner gets as much enjoyment out of it as i have!

Either Dr Baxter has a fleet of cars or he comes to work in a limo....

[KASUYAHO]

Originally Posted by johnno950

What are servicehonda like to deal with if chasing 650r parts?,see they got a oz distributer so do they make you deal with them?.Nice s/hand bikes on the s/honda website.

I never have dealt with ServiceHonda,
There pretty good i am told by a few guys.
There prices are on the money.

[KASUYAHO]

Originally Posted by WILL_S

xr650 dragster
pretty eh

I don'tthink it would be too good on the whoops Willis

[digga1111]

i like this
http://advrider.com/forums/showthrea...143652&page=83

[digga1111]

this pipe would look nice on a rallye build


F800GS Titanium Exaust
I am selling my titanium exhaust. Was used for a couple of months. Has no scratches. Is just a little bit dirty

Has 4 settings to tune the sound. The sound is amazing. Reason for sale: I am selling my F800GS and I have to make it look "stock". For this purpose I am mounting back original 7kg exhaust.

Price $400!!!! Ultra cheap

Location: Sydney

0488 074 333 Mick

[ditchwitch650]

OK so several pages ago there was alot of air filter talk, and differing thoughts, I have for some time run k&n filters, Recently I ordered a uni filter foam filter it turned up today and i must say i'm impressed with it's quality and design,

the back of the filter has a nice ridge of sealing foam to fit into the recess in the air box, now all i need to decide is weather to use to genuine back fire screen or the twin air high flow screen?

any thoughts???