Go Back   ADVrider > Bikes > Battle Scooters
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 12-03-2012, 04:14 PM   #25
How's that work?
Wentwest's Avatar
Joined: Feb 2007
Location: Northern California
Oddometer: 679
Good luck with the bushing. That speedo part is hell to get to and I've generally taken everything off so I could turn the cluster upside down and let gravity take the oil into the bushing. It really can scream when it's dry.

The locking screw at the front wheel for the cable is a b***h to get out, too. Soak it with penetrating oil for days, then sometimes you can get it with an impact driver and heat from a hair dryer or a heat gun. You should get a new one before you even start, because you are sure to mess up the slots on the old one. Hondas use Japanese phillips screws and they have differences in the shape of the slots. If you have a screwdriver from an old Honda tool set, use it.
Wentwest is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 06:53 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015