|12-06-2012, 03:56 PM||#16|
Joined: Oct 2004
Location: India Wharf
Pretty ingenious Yardstick. You must have a lot of experience.
My old 2004 950A had a particularly high safety bead molded into the rim. I am told the 2006 and later models have a more friendly rim. In my case, I bought a custom bead breaker I could carry and I ground off some of the safety bead by simply running the thing in 2nd gear on the center stand and holding a file to the safety bead of a bare rim. Then I ground 10 inches of the safety bead off completely, opposite the stem and painted a spoke to mark it. Worked for 7 years for me with a few trailside flat fixes or tire replacements.
I used WD40 as a lube and Cyclepump for inflation. The front could use a little trail jack to hold it up when pulling that wheel, but I generally used a Gobi case.
Today I ride a Yam wrr and a KTM 690R. They are much easier to spoon rubber. Part of it is because the tires are softer. I use a compact trail jack for those bikes. Don't even need a center stand.
Straight ahead and faster -Bo Weaver 1970
"There I was..." -Griffin Niner Three Hotel
"One day closer to a parade..." Jonny Gomes, spring training 2013
|Thread Tools||Search this Thread|