NEW ! Promach Dual Tool Plus - Page 3

jfslater98 · 11-05-2012, 04:59 AM

Not sure if you've done a run yet, but I'd be interested in a red one as well. If it's not too much trouble.

Promach 1 · 11-10-2012, 06:30 PM

Quote:

Originally Posted by jfslater98

Not sure if you've done a run yet, but I'd be interested in a red one as well. If it's not too much trouble.

I haven't run anymore at this time. When I do, I will do a short run of red ones to see how they sell.
Right now I am running a batch of Dual Tools. The new hex tool will be upgraded from 6061-T6 aluminum,
to 7075-T6 aircraft grade aluminum. This will just about double the tensle strength of this tool.

Promach 1 · 12-08-2012, 11:38 AM

Christmas is just around the corner.............and speaking of corners, that's what I want for Christmas.....lots of corners!!!!!!!

WeazyBuddha · 12-11-2012, 06:50 AM

I read on another thread that some were having trouble with the spark plug portion of the tool. Has that problem been addressed? If so, what was the issue? Thanks.

Promach 1 · 12-12-2012, 04:50 PM

I haven't had but one complaint about it being a little tight. I am going to loosen the tolerance on the batch that I'm working on now. Do you have a link to this thread. I would like to know of any issues with our products. I would appreciate comments coming to me so I can correct them.
Thanks for the heads up.
Promach 1

WeazyBuddha · 12-12-2012, 07:35 PM

Appreciate your response. Link

Roy Barnes · 12-13-2012, 04:49 PM

Quote:

Originally Posted by Promach 1

I haven't had but one complaint about it being a little tight. I am going to loosen the tolerance on the batch that I'm working on now. Do you have a link to this thread. I would like to know of any issues with our products. I would appreciate comments coming to me so I can correct them.
Thanks for the heads up.
Promach 1

Will this tool fit the spark plug coil on a F650gs?

Promach 1 · 12-14-2012, 02:22 PM

I couldn't tell you on that, it might be a question that a BMW mechanic would know.

Promach 1 · 12-25-2012, 07:29 AM

Merry Christmas and a happy new year to all. We hope the next riding season comes soon and thanks to all that made our 2012 season a great one.

Promach 1 · 01-10-2013, 07:57 AM

Improved version
This week, our new improved version of the Dual Tool comes out! The hex tool is now made of 7075-T6 Aircraft grade aluminum. This provides almost twice the tensel strength of the 6061-T6 material used in the original. The original tool was tested to 100 ft lbs, which is 2 1/2 times the torque required for the front wheel. We have had 3 broken hex tools, out of 700 sold. This should eleminate that problem.
Ride safely and often.
Promach 1

Promach 1 · 02-15-2013, 08:26 AM

We are now on Facebook, go check out our new page! https://www.facebook.com/PromachDualTool

Give us a "Like" if ya have the time.

Promach 1 · 02-27-2013, 03:01 PM

I have some Promach Tamper Resistant Oil Caps made up in Black if anyone would like one.

Paypal $30.00 to dualtool@centurytel.net along with your mailing address.

Promach 1 · 03-04-2013, 07:56 AM

Also have a few in RED

gary5410 · 03-04-2013, 04:19 PM

Quote:

Originally Posted by Promach 1

Also have a few in RED

Ordered!

Promach 1 · 03-14-2013, 08:29 AM

The Red and Black are going fast. Got a few left.

12-08-2012, 11:38 AM	#33
Promach 1 ^OP Promach 1 Joined: Mar 2007 Location: NW Montana, Flathead valley Oddometer: 171	The Dual Tool makes a great stocking stuffer. Christmas is just around the corner.............and speaking of corners, that's what I want for Christmas.....lots of corners!!!!!!!

12-11-2012, 06:50 AM	#34
WeazyBuddha Carbon-Based Humanoid Joined: Mar 2008 Location: RGV Texas Oddometer: 2,712	I read on another thread that some were having trouble with the spark plug portion of the tool. Has that problem been addressed? If so, what was the issue? Thanks. __________________ 08 GS ● 02 KLR ● 12 WR250R ● 04 KDX200 ● 00 VFR

12-12-2012, 04:50 PM	#35
Promach 1 ^OP Promach 1 Joined: Mar 2007 Location: NW Montana, Flathead valley Oddometer: 171	Issue I haven't had but one complaint about it being a little tight. I am going to loosen the tolerance on the batch that I'm working on now. Do you have a link to this thread. I would like to know of any issues with our products. I would appreciate comments coming to me so I can correct them. Thanks for the heads up. Promach 1

12-12-2012, 07:35 PM	#36
WeazyBuddha Carbon-Based Humanoid Joined: Mar 2008 Location: RGV Texas Oddometer: 2,712	Appreciate your response. Link __________________ 08 GS ● 02 KLR ● 12 WR250R ● 04 KDX200 ● 00 VFR

12-14-2012, 02:22 PM	#38
Promach 1 ^OP Promach 1 Joined: Mar 2007 Location: NW Montana, Flathead valley Oddometer: 171	650gs I couldn't tell you on that, it might be a question that a BMW mechanic would know.

11-05-2012, 04:59 AM	#31
jfslater98 Gnarly Adventurer Joined: Nov 2008 Location: Northern NJ Oddometer: 227	Not sure if you've done a run yet, but I'd be interested in a red one as well. If it's not too much trouble.

12-25-2012, 07:29 AM	#39
Promach 1 ^OP Promach 1 Joined: Mar 2007 Location: NW Montana, Flathead valley Oddometer: 171	Merry Christmas Merry Christmas and a happy new year to all. We hope the next riding season comes soon and thanks to all that made our 2012 season a great one.

01-10-2013, 07:57 AM	#40
Promach 1 ^OP Promach 1 Joined: Mar 2007 Location: NW Montana, Flathead valley Oddometer: 171	Improved version Improved version This week, our new improved version of the Dual Tool comes out! The hex tool is now made of 7075-T6 Aircraft grade aluminum. This provides almost twice the tensel strength of the 6061-T6 material used in the original. The original tool was tested to 100 ft lbs, which is 2 1/2 times the torque required for the front wheel. We have had 3 broken hex tools, out of 700 sold. This should eleminate that problem. Ride safely and often. Promach 1

02-15-2013, 08:26 AM	#41
Promach 1 ^OP Promach 1 Joined: Mar 2007 Location: NW Montana, Flathead valley Oddometer: 171	We are on Facebook! We are now on Facebook, go check out our new page! https://www.facebook.com/PromachDualTool Give us a "Like" if ya have the time.

02-27-2013, 03:01 PM	#42
Promach 1 ^OP Promach 1 Joined: Mar 2007 Location: NW Montana, Flathead valley Oddometer: 171	Oil Cap in Black I have some Promach Tamper Resistant Oil Caps made up in Black if anyone would like one. Paypal $30.00 to dualtool@centurytel.net along with your mailing address. Promach 1 screwed with this post 02-28-2013 at 12:53 PM

03-04-2013, 07:56 AM	#43
Promach 1 ^OP Promach 1 Joined: Mar 2007 Location: NW Montana, Flathead valley Oddometer: 171	Red Also have a few in RED

03-14-2013, 08:29 AM	#45
Promach 1 ^OP Promach 1 Joined: Mar 2007 Location: NW Montana, Flathead valley Oddometer: 171	Oil Caps The Red and Black are going fast. Got a few left.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode