Call all XR600R!!! - Page 433

bosley1980 · 12-23-2012, 05:14 AM

Can somebody please verify and write (PM) whether Footpegs would fit on your motorcycle.
Which dimensions modify to fit them.
Thank you very much

Drawings here

and

Implementation:

luckyjr · 12-23-2012, 07:46 AM

Anyone know of a aftermarket frame manufactured for a 95 xr600r?

Royal Club · 12-23-2012, 10:06 AM

Quote:

Originally Posted by luckyjr

Anyone know of a aftermarket frame manufactured for a 95 xr600r?

'Bakker.. maybe..

elsalvadorklr · 12-23-2012, 10:40 AM

not aftermarket but if you can find an atk605 frame you are golden...

MentalGuru · 12-23-2012, 10:47 AM

Quote:

Originally Posted by elsalvadorklr

not aftermarket but if you can find an atk605 frame you are golden...

I want a ATK frame meant for the twin carb XR/XL engine.

Here's what you want...

Ghost_Mutant · 12-23-2012, 11:00 AM

Quote:

Originally Posted by MentalGuru

I want a ATK frame meant for the twin carb XR/XL engine.

That's a rare bird...............I've been standing in the XR/ATK line for a few decades now

And I've never even seen the bike in person, only photos.

If I recall correctly, the early ATKs with the XR engine used an adapter to mount a single carb to the dual carb head. This is the only thing I didn't like about those early ATKs. I suppose after riding one I might find more things to dislike

What kind of aftermarket frame are we looking for?...............A question for Lucky

I thought it might be interesting to take a RFVC, air cooled XR engine and stuff it into a more modern aluminum frame, but which frame would be most compatible?

elsalvadorklr · 12-23-2012, 11:09 AM

^^^^thing is Ive never seen someone succesfully do the swap...ive seen many threads with promise that dead end....

as we all know a better frame would make the xr engine shine more

anyways...

hope somoene does this someday, sometime! that would be a sight to see and RIDE!

nikolic · 12-23-2012, 12:09 PM

Finaly found some time to disassamble my little pig, and I'm kinda confused! It's been worked on before I bought it... I knew it from the start, cause it has 100mm cilinder on... but what confuses me, looking at a camshaft (will take pictures tomorow)
I tend to ask some questions. Does the XR shaft have the middle bearing? There is an assembly on mine that looks like decompresor, and I definitly dont nead it

. and if there is no bearing on the camshaft, should there be a seat on
the head... uh... it would be easyee with the pics...

luckyjr · 12-23-2012, 12:13 PM

Quote:

Originally Posted by Ghost_Mutant

That's a rare bird...............I've been standing in the XR/ATK line for a few decades now

And I've never even seen the bike in person, only photos.

If I recall correctly, the early ATKs with the XR engine used an adapter to mount a single carb to the dual carb head. This is the only thing I didn't like about those early ATKs. I suppose after riding one I might find more things to dislike

What kind of aftermarket frame are we looking for?...............A question for Lucky

I thought it might be interesting to take a RFVC, air cooled XR engine and stuff it into a more modern aluminum frame, but which frame would be most compatible?

Aluninum would be great......thats probable asking for alot. I would be happy with a chrome-moly well crafted frame. I was thinking about doing a restore job on my bike and the frame has always been a eye sore. But yes, it would be interesting to find a late model dirt bike frame that would adapt. I dont use a factory air box so I have more room.

mcma111 · 12-23-2012, 12:52 PM

Quote:

Originally Posted by nikolic

Finaly found some time to disassamble my little pig, and I'm kinda confused! It's been worked on before I bought it... I knew it from the start, cause it has 100mm cilinder on... but what confuses me, looking at a camshaft (will take pictures tomorow)
I tend to ask some questions. Does the XR shaft have the middle bearing? There is an assembly on mine that looks like decompresor, and I definitly dont nead it

. and if there is no bearing on the camshaft, should there be a seat on
the head... uh... it would be easyee with the pics...

No bearing in the center of the cam

nikolic · 12-23-2012, 03:39 PM

Allright, no bearing, but my camshaft doesn't look like yours!

6,4,11 are what is troubling me! [IMG]http://d136nqpz68vrmx.cloudfront.net...les/10/1_0.png[/IMG]

mcma111 · 12-23-2012, 04:09 PM

Quote:

Originally Posted by nikolic

Allright, no bearing, but my camshaft doesn't look like yours!

6,4,11 are what is troubling me! [IMG]http://d136nqpz68vrmx.cloudfront.net...les/10/1_0.png[/IMG]

Sure it does. 6,4 and 11 are behind #12. These parts make up the decompressor assembly.

nikolic · 12-23-2012, 11:49 PM

but I have a manual decompresor, why to hell do I need these? can I remove it somehow? looking at it, it doesn't look like it's doing anything!

mcma111 · 12-24-2012, 04:13 AM

It is also part of the anti kick back. There is no reason to remove. Mr Honda put it there for a reason.

fiep · 12-24-2012, 06:08 AM

Quote:

Originally Posted by mcma111

It is also part of the anti kick back. There is no reason to remove. Mr Honda put it there for a reason.

the drysump 250 has the same gizmo
it rattled and I removed it
can live with the occasional attempt to kick back of a little thumper
a big thumper split my heel a long time ago
that was very little fun

it is your personal choice, of course you can remove
but please do not complain if you get to pay the price

12-23-2012, 05:14 AM	#6481
bosley1980 Rider Joined: Jul 2011 Location: Middle Europe Oddometer: 105	Query Can somebody please verify and write (PM) whether Footpegs would fit on your motorcycle. Which dimensions modify to fit them. Thank you very much Drawings here and Implementation: __________________ HERE MAP OF MY FOOTPEGS USERS

12-23-2012, 07:46 AM	#6482
luckyjr Adventurer Joined: Jul 2012 Location: Sequndo Frente Oddometer: 78	Frames Anyone know of a aftermarket frame manufactured for a 95 xr600r?

12-23-2012, 12:09 PM	#6488
nikolic Gnarly Adventurer Joined: Apr 2007 Location: Serbia Oddometer: 413	Finaly found some time to disassamble my little pig, and I'm kinda confused! It's been worked on before I bought it... I knew it from the start, cause it has 100mm cilinder on... but what confuses me, looking at a camshaft (will take pictures tomorow) I tend to ask some questions. Does the XR shaft have the middle bearing? There is an assembly on mine that looks like decompresor, and I definitly dont nead it . and if there is no bearing on the camshaft, should there be a seat on the head... uh... it would be easyee with the pics... __________________ Home rides ;)

12-23-2012, 03:39 PM	#6491
nikolic Gnarly Adventurer Joined: Apr 2007 Location: Serbia Oddometer: 413	Allright, no bearing, but my camshaft doesn't look like yours! 6,4,11 are what is troubling me! [IMG]http://d136nqpz68vrmx.cloudfront.net...les/10/1_0.png[/IMG] __________________ Home rides ;)

12-23-2012, 11:49 PM	#6493
nikolic Gnarly Adventurer Joined: Apr 2007 Location: Serbia Oddometer: 413	but I have a manual decompresor, why to hell do I need these? can I remove it somehow? looking at it, it doesn't look like it's doing anything! __________________ Home rides ;)

12-23-2012, 10:40 AM	#6484
elsalvadorklr Beastly Adventurer Joined: Nov 2008 Location: el salvador Oddometer: 3,966	not aftermarket but if you can find an atk605 frame you are golden...

12-23-2012, 11:09 AM	#6487
elsalvadorklr Beastly Adventurer Joined: Nov 2008 Location: el salvador Oddometer: 3,966	^^^^thing is Ive never seen someone succesfully do the swap...ive seen many threads with promise that dead end.... as we all know a better frame would make the xr engine shine more anyways... hope somoene does this someday, sometime! that would be a sight to see and RIDE!

12-24-2012, 04:13 AM	#6494
mcma111 Beastly Adventurer Joined: Jul 2007 Location: San Francisco,Ca. Oddometer: 7,986	It is also part of the anti kick back. There is no reason to remove. Mr Honda put it there for a reason. __________________ Steve in SF BMW's 58 R26 79 R100s 91 R100gs 87 Harley FXRS-SP ~ 06 KTM 625 SMC ~ 72 Honda CB750/915cc ~ 92 XR600/654cc ~ 95 XR650l/675cc ~ 03 CRF450r ~ 05 CRF450x ~ 02 XR650l/675cc ~ 86 YZ490 ~ 93 YZ80 ~ 93 XR650l Project

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode