The CRF250L Owners thread - Page 119

Nanocer · 12-28-2012, 09:17 PM

Quote:

Originally Posted by JRaye89

What site did you buy those white oem pieces from?

It wasn't a site, I did it via email/PayPal. The man's name is Nat and you can reach him at pistonclub69@yahoo.com or s_watit@hotmail.com.

-Will

SAPB · 12-29-2012, 05:51 AM

Quote:

Originally Posted by Harcomo

If I'm understanding you correctly, you are wanting to remove your stock plastic skid plate? The only bolts you remove are the two bolts on the front of the plate under the exhaust header. Then you just pull the plastic plate forward and out of it's slot in the rear. No bolts to remove on the rear of it.

Thanks, I went back out and wiggled it while pulling, and it came right out. Lots of dirt (dried up mud) in there. The Ricochet more or less went right in, had to take all the bolts back out though, forgot to put anti-sieze on. Did get the Cycra guards on yesterday, not so bad, just had to cut a little more off the end of the throttle tube to clear the billet so it wouldn't bind. The ManRack was easy, now to order a Wolfman tankbag, and Luggage Electrix connector. Already have it wired back to the battery, but the controller for the gloves is just clipped to the plastic that covers the radiator now. Snow here later today, show be able to go play in it a bit.

Ed@Ford · 12-29-2012, 07:27 AM

TOMMYRG:

Who's header pipe is that?

Dirtchuck · 12-29-2012, 09:46 AM

Looks like the FMF power bomb. How do you like it tommy? Mine should be here real soon.

frenchman81 · 12-29-2012, 10:02 AM

Hello, I'm writing from south of France, got my CRF250L in september; it's a very good bike still few in France. I put a 13T sprocket. I'm reading all messages for the mods which are not yet possible in France. I'll try to put some pics of the bike...

I'm a nut with computers: I failed setting a pic in the thread...

G19Tony · 12-29-2012, 10:42 AM

Quote:

Originally Posted by frenchman81

Hello, I'm writing from south of France, got my CRF250L in september; it's a very good bike still few in France. I put a 13T sprocket. I'm reading all messages for the mods which are not yet possible in France. I'll try to put some pics of the bike...

Welcome aboard. Lot's of good information here.

SAPB · 12-29-2012, 11:03 AM

Quote:

Originally Posted by G19Tony

Welcome aboard. Lot's of good information here.

Yes, I agree, owners are always willing to share information. Learned a lot here while waiting for my ordered bike to finally get here.

Ed@Ford · 12-29-2012, 11:48 AM

You guys out there that are lusting over a CRF, and live within a 100 miles or so of Memphis, lust no more. My buddy was just at the Honda store in Memphis...$4299 + $120 for county tax and paperwork will get you one! It's not economical for me to drive from Detroit to Memphis to get it....but if you're close....you can get lucky on Monday.

ryguy83 · 12-29-2012, 12:06 PM

looks damn good in white,i told myself if i was gonna get one,i would wait until we get that awsome white they get,now that i know you can order them white pieces,very tempting,how much was the complete set?

-ry

irdhwy2 · 12-29-2012, 12:15 PM

Check-out Turbo City in Anahiem Ca,for lots of protection for your bike.Skid plates,guards,wind deflectors etc.
from what I understand they are working on the cooling system radiator guard.

Ed@Ford · 12-29-2012, 01:06 PM

Quote:

Originally Posted by siyeh

here is Nanocer's CRF:

Over on another CRF250L site they paint their bikes with plasti-dip...sometimes sealed with clear krylon spray....maybe get some white plasti-dip and get rid of the black tank!

Those white trim bits and the white seat are sweet...fine job....is that white trim unique to asia....or maybe is it available in europe?

siyeh · 12-29-2012, 02:27 PM

Quote:

Originally Posted by Ed@Ford

Over on another CRF250L site they paint their bikes with plasti-dip

Where is this? Got a link?

Ed@Ford · 12-29-2012, 02:38 PM

Quote:

Originally Posted by siyeh

Where is this? Got a link?

http://www.advrider.com/forums/showp...postcount=1591

Nanocer · 12-29-2012, 03:26 PM

With shipping it was $318.00, that includes all the stickers for the white version(not shown). Btw the seat is silver, not white. I'm thinking about sending my red seat to seat concepts for their make over :) when I get a chance I'll dig up the part numbers.

-Will

Harcomo · 12-30-2012, 09:41 AM

What do you use to remove the factory decals on the rear plastic fender or other plastic parts? Some of you have painted parts of your plastic with the Plasti Dip and I'm curious as to how you removed your decals as they seem tough to remove.

12-29-2012, 10:02 AM	#1775
frenchman81 n00b Joined: Dec 2012 Location: South of France Oddometer: 1	A new member from France Hello, I'm writing from south of France, got my CRF250L in september; it's a very good bike still few in France. I put a 13T sprocket. I'm reading all messages for the mods which are not yet possible in France. I'll try to put some pics of the bike... I'm a nut with computers: I failed setting a pic in the thread... frenchman81 screwed with this post 12-29-2012 at 02:00 PM

12-29-2012, 12:15 PM	#1780
irdhwy2 n00b Joined: Nov 2012 Oddometer: 2	added options Check-out Turbo City in Anahiem Ca,for lots of protection for your bike.Skid plates,guards,wind deflectors etc. from what I understand they are working on the cooling system radiator guard.

12-30-2012, 09:41 AM	#1785
Harcomo Adventurer Joined: Sep 2012 Location: Missouri Oddometer: 94	Sticker removal from plastic What do you use to remove the factory decals on the rear plastic fender or other plastic parts? Some of you have painted parts of your plastic with the Plasti Dip and I'm curious as to how you removed your decals as they seem tough to remove.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-29-2012, 07:27 AM	#1773
Ed@Ford Beastly Adventurer Joined: Jan 2004 Location: Dearborn MI Oddometer: 1,049	TOMMYRG: Who's header pipe is that?

12-29-2012, 09:46 AM	#1774
Dirtchuck Adventurer Joined: Sep 2012 Location: NY Oddometer: 17	Looks like the FMF power bomb. How do you like it tommy? Mine should be here real soon.

12-29-2012, 11:48 AM	#1778
Ed@Ford Beastly Adventurer Joined: Jan 2004 Location: Dearborn MI Oddometer: 1,049	You guys out there that are lusting over a CRF, and live within a 100 miles or so of Memphis, lust no more. My buddy was just at the Honda store in Memphis...$4299 + $120 for county tax and paperwork will get you one! It's not economical for me to drive from Detroit to Memphis to get it....but if you're close....you can get lucky on Monday.

12-29-2012, 12:06 PM	#1779
ryguy83 Adventurer Joined: Aug 2012 Oddometer: 14	looks damn good in white,i told myself if i was gonna get one,i would wait until we get that awsome white they get,now that i know you can order them white pieces,very tempting,how much was the complete set? -ry

12-29-2012, 03:26 PM	#1784
Nanocer Adventurer Joined: Sep 2012 Location: SoCal Oddometer: 15	With shipping it was $318.00, that includes all the stickers for the white version(not shown). Btw the seat is silver, not white. I'm thinking about sending my red seat to seat concepts for their make over :) when I get a chance I'll dig up the part numbers. -Will