|01-01-2013, 03:50 PM||#1|
Joined: Jan 2010
I have a 2007 R1200GS Adventure. I would like to replace the grips with a set of universal grips I like. Can that be done or do I have to buy the expensive BMW grips. My bike has heated grips.
|01-01-2013, 04:16 PM||#2|
Joined: Jan 2005
Location: The Badlands (of NJ)
I have them on all my bikes; the oldest pair installed 5 years ago, still shows no UV or wear damage after about 40k miles. I got them originally to reduce vibration imparted on my hands. They also worked well for general comfort (slightly increasing diameter of the grips). There is no loss of heating.
One of the best deals ever. Installation takes about 10 minutes. Get the small size, you will need to shorten them a bit with scissors, lube with dishwasher fluid and just slide on.
Replacement of OEM grips is not easy (there is a pictorial somewhere here on ADVrider) and you are risking damaging the heaters, extra cost.
Robert in Northern NJ __ '09 R12GS, '03 R1150RT, '01 F650GS
-->> James Bay & North Road Solo Blitz -->> Patagonia / Tierra del Fuego Cappuccino Tour
-->> Trans-Labrador Highway Solo Blitz --->> South African Cappuccino Tour
rdwalker screwed with this post 01-01-2013 at 08:03 PM
|01-01-2013, 06:23 PM||#4|
Joined: Mar 2012
Location: Toronto On
This is how I did mine.
I used some generic grips as replacement.
|Thread Tools||Search this Thread|