Go Back   ADVrider > Bikes > Thumpers
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 01-02-2013, 08:08 PM   #1
davisdrafting OP
Joined: May 2009
Location: NorCAL
Oddometer: 10
DR200SE OEM blinker (wings) mod

The hardest part is removing the pins from the connector, they are retained by plastic from the connector not metal on the pin which is typical.

Cut stem about 1/2" from last ridge

From Drop Box

Chop off about 1/2" from flat mounting surface and remove rubber

From Drop Box

Drill the end that fits in the blinker out to 1/2" dia. (a 1/2" step drill works best) insert threaded mount into hole 1/8: apply super glue and press together in vise.

From Drop Box


From Drop Box
davisdrafting is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 01:33 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015