|01-07-2013, 03:11 AM||#1|
Joined: Oct 2012
Location: Bottom left hand side of OZ
CPR Air Filter Jetting kit. Recognise it?
I just got the CPR Rottweiler air filter from Two Moto Kiwis (thanks by the way!)
I am trying to identify the needles I got with it. There are no markings I can see. My eyes arnt the best I admit so there could be markings somewhere.
With it I got 2x45, 2x56, 178, 180 jets. Clips are on the middle setting on needles.
I guess the 180 goes on the rear and I think it would be ok to just fit them and go, But I would really like to know what needles I have.
There is a steep step down about 5mm under the last groove, then a smooth taper to the end. Anyone recognise them?
I should add its going on a 03 950 Adventure. At sea level, would this set up suit? It has KTM performance pipes. Not quite as free flowing as say Akrapovic I would say.
rossguzzi screwed with this post 01-07-2013 at 04:41 AM
|Thread Tools||Search this Thread|