Jetting kit. Recognise it?

rossguzzi · 01-07-2013, 02:11 AM

I just got the CPR Rottweiler air filter from Two Moto Kiwis (thanks by the way!)

I am trying to identify the needles I got with it. There are no markings I can see. My eyes arnt the best I admit so there could be markings somewhere.

With it I got 2x45, 2x56, 178, 180 jets. Clips are on the middle setting on needles.

I guess the 180 goes on the rear and I think it would be ok to just fit them and go, But I would really like to know what needles I have.

There is a steep step down about 5mm under the last groove, then a smooth taper to the end. Anyone recognise them?

I should add its going on a 03 950 Adventure. At sea level, would this set up suit? It has KTM performance pipes. Not quite as free flowing as say Akrapovic I would say.
Cheers

Two Moto Kiwis · 01-07-2013, 08:29 AM

Pinged you a PM as well Ross.

Adventure Machines is the kit, at least at sea level you will get full bang for buck

You have,

2x45 = Primaries

2x56 = Air, Bleeds

178 = Front Main let

180 = Rear Main jet

Clips are on the middle setting on needles, that is the position when we took them out at that first and the bike ran well (for the 35 mile I rode it).

Hope this helps mate, that is my total knowledge on the kit.

rossguzzi · 01-07-2013, 06:52 PM

Great stuff. Going to install today. 40c temp so will see.

ciedema · 01-07-2013, 07:18 PM

Quote:

Originally Posted by rossguzzi

40c temp so will see.

Blah. I will home in a couple of weeks, not looking to the heat - Phoenix has been quite nice. (Even with Kiwis)

rossguzzi · 01-08-2013, 03:52 AM

Half Oztrailer burning, its sooo hot !

Fitted the air kit and jets. Goes well. Better test ride tomorrow, only 30c. :)

TcRulz · 01-09-2013, 05:47 PM

Quote:

Originally Posted by rossguzzi

Half Oztrailer burning, its sooo hot !

Fitted the air kit and jets. Goes well. Better test ride tomorrow, only 30c. :)

So how did it go? You've probably got 'Factory Pro' needles.

rossguzzi · 01-09-2013, 06:32 PM

Made by Adventure Machines I am told.
Didnt get to ride it yesterday, did the steering head bearings. Will ride today.

01-07-2013, 02:11 AM	#1
rossguzzi ^OP Gnarly Adventurer Joined: Oct 2012 Location: Bottom left hand side of OZ Oddometer: 262	CPR Air Filter Jetting kit. Recognise it? I just got the CPR Rottweiler air filter from Two Moto Kiwis (thanks by the way!) I am trying to identify the needles I got with it. There are no markings I can see. My eyes arnt the best I admit so there could be markings somewhere. With it I got 2x45, 2x56, 178, 180 jets. Clips are on the middle setting on needles. I guess the 180 goes on the rear and I think it would be ok to just fit them and go, But I would really like to know what needles I have. There is a steep step down about 5mm under the last groove, then a smooth taper to the end. Anyone recognise them? I should add its going on a 03 950 Adventure. At sea level, would this set up suit? It has KTM performance pipes. Not quite as free flowing as say Akrapovic I would say. Cheers rossguzzi screwed with this post 01-07-2013 at 03:41 AM

01-07-2013, 08:29 AM	#2
Two Moto Kiwis Homeless Somewhere Joined: Apr 2007 Location: Wanaka, New Zealand, Currently RTWing Oddometer: 1,804	Pinged you a PM as well Ross. Adventure Machines is the kit, at least at sea level you will get full bang for buck You have, 2x45 = Primaries 2x56 = Air, Bleeds 178 = Front Main let 180 = Rear Main jet Clips are on the middle setting on needles, that is the position when we took them out at that first and the bike ran well (for the 35 mile I rode it). Hope this helps mate, that is my total knowledge on the kit. __________________ Cheers Andi & Ellen...Two Moto Kiwi Grüvers .....somewhere Two Moto Kiwis Home Page For More Of Two Moto Kiwis Photos

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-07-2013, 06:52 PM	#3
rossguzzi ^OP Gnarly Adventurer Joined: Oct 2012 Location: Bottom left hand side of OZ Oddometer: 262	Great stuff. Going to install today. 40c temp so will see.

01-08-2013, 03:52 AM	#5
rossguzzi ^OP Gnarly Adventurer Joined: Oct 2012 Location: Bottom left hand side of OZ Oddometer: 262	Half Oztrailer burning, its sooo hot ! Fitted the air kit and jets. Goes well. Better test ride tomorrow, only 30c. :)

01-09-2013, 06:32 PM	#7
rossguzzi ^OP Gnarly Adventurer Joined: Oct 2012 Location: Bottom left hand side of OZ Oddometer: 262	Made by Adventure Machines I am told. Didnt get to ride it yesterday, did the steering head bearings. Will ride today.