1984 XL600R Build

lamebrain · 01-13-2013, 10:41 PM

Here it is with the front end on for good. The swingarm is on temporarily while I figure out where I'm going to route the shocks remote reservoir and hose.[/QUOTE]

Here is how i routed mine

It's pretty much in the same spot as the XR, but there is no tab for the clamp. I just used a hose clamp to secure it to the frame. The carbs and boots are off in the pic, but there aren't any clearance issues. hope the pic helps you, glad to see you're making progress!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-13-2013, 10:41 PM	#11
lamebrain Adventurer Joined: Jan 2011 Location: Oregon Oddometer: 38	Here it is with the front end on for good. The swingarm is on temporarily while I figure out where I'm going to route the shocks remote reservoir and hose.[/QUOTE] Here is how i routed mine It's pretty much in the same spot as the XR, but there is no tab for the clamp. I just used a hose clamp to secure it to the frame. The carbs and boots are off in the pic, but there aren't any clearance issues. hope the pic helps you, glad to see you're making progress!