Got it! KTM 660 Rallye

[Åmme]

Originally Posted by LukasM

These panels are not stock, the tanks are normally painted directly.

Thanks for the quick reply Lukas, I found out today that the tanks have old paint under the Deuz fasterners, actually the panels aint a bad idea as it makes repainting easy as well as the protect the tanks.

PS what about you questions about 570/Tuareg ?

[Åmme]

Oossie,

Sorry for using your thread, but do anybody have the colorcode for the grey frame paint ?

[bmwktmbill]

Amme, are you in Ulan Bator?
Where do you stay?

Do you go to the Irish Pub?
Pretty women.
bill

[oossie]

i hope to get the tanks and fairing back this week from the painter.
Just decided to one color: KTM White (also known as Nissan QV1)

The striping /design is still work from a good friend B-art, he does a great job in motor design and i can't wait to see his drawing with some ideas

Also got this week the subframe back from the coater, it's gonna be nice!

[oossie]

Got finaly zome new parts, suspension is back and also got the rear subframe parts back from the coater.

Starts looking a bike again.


Brand new rally pegs (are standard parts KTM, model 690RR and/or 450RR)


Those pegz are really longer (approx. 20mm) and wider (5mm) then the standard ones. And the teeth real alligators, this beast is gonna eat my boots

[Alik]

Originally Posted by oossie

Got finaly zome new parts, suspension is back and also got the rear subframe parts back from the coater.

Brand new rally pegs (are standard parts KTM, model 690RR and/or 450RR)


Those pegz are really longer (approx. 20mm) and wider (5mm) then the standard ones. And the teeth real alligators, this beast is gonna eat my boots

What is the part number? ;)

[oossie]

Originally Posted by Alik

What is the part number? ;)

Here you go: 60103940000 (Rally pegs)

[Rensen]

Man I love the ktm Rallye´s

btw great thread, keep going, I´m in

[oossie]

Next week the RNS navigation parts are coming in.

Still not decided what to choose as Roadbook, the MD is worn down and the motor has broken down. Maybe a F2R 730. I'm not sure. Someone who has a brokendown MD? I'm running out of budget so have to keep it simple with the roadbook.

Also the sprankling white fairing is also coming, the graphics on it is still under development :)

The electrics is still a pain, have to decide wether or not to put turnsignals on it. Has one of you out there found a LC4 rearlight with integrated turnsignals?

[italrally]

Originally Posted by oossie

Next week the RNS navigation parts are coming in.

Still not decided what to choose as Roadbook, the MD is worn down and the motor has broken down. Maybe a F2R 730. I'm not sure. Someone who has a brokendown MD? I'm running out of budget so have to keep it simple with the roadbook.

Also the sprankling white fairing is also coming, the graphics on it is still under development :)

The electrics is still a pain, have to decide wether or not to put turnsignals on it. Has one of you out there found a LC4 rearlight with integrated turnsignals?

THE MD is full reparable, you can buy every single part, also only the engine. Or buy a MIGTEC, same as on Husky and Hondas factory rally bikes, cost in my shop 250,- Euro.

[tileman]

Originally Posted by Alik

What is the part number? ;)

Does anyone know if these pegs also fit a 03 adv?

[LukasM]

Originally Posted by italrally

THE MD is full reparable, you can buy every single part, also only the engine. Or buy a MIGTEC, same as on Husky and Hondas factory rally bikes, cost in my shop 250,- Euro.

You can probably get the electric motor from an online store much cheaper than directly from Marco D. I remember that somebody posted the part number on the forum a couple of years ago, or Tony Schattat will know it for sure.

Originally Posted by tileman

Does anyone know if these pegs also fit a 03 adv?

Pretty sure they will. I'd look at the Fastway Adventure pegs instead though, the replaceable cleats are an easy way to keep a sharp edge over the years and they are probably lighter while being stronger.

[schattat]

Originally Posted by oossie

Brand new rally pegs (are standard parts KTM, model 690RR and/or 450RR)


Those pegz are really longer (approx. 20mm) and wider (5mm) then the standard ones. And the teeth real alligators, this beast is gonna eat my boots

Nice, I just ordered myself a set for my WRF, I'm hoping they will somehow fit, the geometry seems to look the same atleast

[Mudguts]

Hey Tony why not Fastway rally/adv pegs , they make them for WR's

[schattat]

Originally Posted by Mudguts

Hey Tony why not Fastway rally/adv pegs , they make them for WR's

Hi mate,
Didn't know they even existed Just had a look at them, they're nice billet looking, but almost twice as expensive as the KTM rallye ones!