Houston Area Riders

[fritzcoinc]

Originally Posted by my6

Ya don't miss a thing there do ya? No Sir. It's a gas leak. I will be pulling the Mikuni and replacing the Needle Valve assembly in the next day or two. If the gas is on it continually drips gas out of the overflow hose until it's all gone. I read on TT that the Oring was probably the problem so I ordered the whole assembly and it arrived yesterday. I took a little spin around the hood today and one thing I can tell you is it sure pulls alot harder then the 01/KTM/400EXC I had.

No smoking.
You read that on TT aye, so it must be true. Because they can't put ANYTHING on TT that isn't true.