KTM 690 Adventure EVO2 Kit - Page 10

ktmmitch · 01-27-2013, 05:37 AM

Here are pics of our new billet levers fitted to a 690 Enduro R

ktmmitch · 01-27-2013, 05:38 AM

Brake Side

nibby · 01-27-2013, 09:05 AM

Do you know the total weight of Evo2 kit with screen/headlight/tanks, basically everything without the nav unit? Think it's the Adventure Kit? Also with the low fender.

Looking for the total difference in weight when fitted compared to standard.

cheers

ktmmitch · 01-27-2013, 10:20 AM

Quote:

Originally Posted by nibby

Do you know the total weight of Evo2 kit with screen/headlight/tanks, basically everything without the nav unit? Think it's the Adventure Kit? Also with the low fender.

Looking for the total difference in weight when fitted compared to standard.

cheers

4 kgs Tanks & 5,8 kgs Adv Fairing Kit.

nibby · 01-27-2013, 10:59 AM

Good stuff, Cheers. So less than 10kg for the lot, impressive.

Baja Dad · 01-27-2013, 05:45 PM

This kit is so EASY to install!!!!! Very nice work done by Rally Raid UK
I have a ton of Pics ( I will post soon)
but I can not up load anything until I get my Desk top fixed on Monday

Thank god for my I phone!!!

xplor · 01-27-2013, 07:26 PM

looking forward to the pics

Bill the Bong · 01-27-2013, 07:39 PM

Quote:

Originally Posted by Baja Dad

This kit is so EASY to install!!!!! Very nice work done by Rally Raid UK
I have a ton of Pics ( I will post soon)
but I can not up load anything until I get my Desk top fixed on Monday

Thank god for my I phone!!!

Did you take photos of the rectifier/regulator set-up?

Baja Dad · 01-27-2013, 07:59 PM

Quote:

Originally Posted by Bill the Bong

Did you take photos of the rectifier/regulator set-up?

Yes I did!
Before and after

Bill the Bong · 01-27-2013, 08:09 PM

Quote:

Originally Posted by Baja Dad

Yes I did!
Before and after

Awesome, looking forward. Even though my kit was only ondered over the weekend and should take 3 weeks to reach me, I'm busy trying to sort all the details.

Did you use heat resistant bandage on the exhaust to protect the left tank?

Baja Dad · 01-28-2013, 03:22 PM

Here are a few pics:

dirty_sanchez · 01-28-2013, 03:52 PM

Daddyo- Is the fuel crossover line connected to the lower front lobes, then fed to the rear tank?

Was it a fairly straightforward install?

Looking sharp!

Dirty

Baja Dad · 01-28-2013, 04:20 PM

Quote:

Originally Posted by dirty_sanchez

Daddyo- Is the fuel crossover line connected to the lower front lobes, then fed to the rear tank?

Was it a fairly straightforward install?

Looking sharp!

Dirty

Real Easy !!!
Yes that is how the fuel lines work
I may try to install a small vacuum fuel pump and a three way fuel valve ( Like the 690 rally bike)
Then I can monitor where the fuel comes from and to help balance the bike.
Then I also have a back up fuel pump on the bike.

Assfault · 01-28-2013, 04:24 PM

Yea! I received notice my tank kit was enroute.
I going a bit different and melding a traditional fairing to the EVO2 tanks.
I have the fairing bracket and the rest of the pieces to put it all together.
I gonna be like a kid in a candy store here soon.

Sent from my iPad using Tapatalk HD

Baja Dad · 01-28-2013, 05:42 PM

Quote:

Originally Posted by Assfault

Yea! I received notice my tank kit was enroute.
I going a bit different and melding a traditional fairing to the EVO2 tanks.
I have the fairing bracket and the rest of the pieces to put it all together.
I gonna be like a kid in a candy store here soon.

Sent from my iPad using Tapatalk HD

SO TRUE !!!!!!
I can not find enough time to work on my bikes!!!
Damm job keep's getting in the way !!!

01-27-2013, 05:37 AM	#136
ktmmitch Gnarly Adventurer Joined: Sep 2009 Location: uk Oddometer: 192	Billet Levers fitted Here are pics of our new billet levers fitted to a 690 Enduro R __________________ www.rally-raidproducts.co.uk

01-27-2013, 05:38 AM	#137
ktmmitch Gnarly Adventurer Joined: Sep 2009 Location: uk Oddometer: 192	Billet Levers fitted Brake Side __________________ www.rally-raidproducts.co.uk

01-27-2013, 05:45 PM	#141
Baja Dad Beastly Adventurer Joined: Jan 2011 Location: Norco California Oddometer: 1,219	This kit is so EASY to install!!!!! Very nice work done by Rally Raid UK I have a ton of Pics ( I will post soon) but I can not up load anything until I get my Desk top fixed on Monday Thank god for my I phone!!! __________________ Thanks for the 2013 support:GPR Stablizers,Seat Concepts,Kriega.us, Precision Concepts, Acerbis, AME Grips,Rally Raid UK TLD, Klim,Oakley, Sidi-Motonation, Dunlop,ZLT Three Brothers Racing KTM,Multitool FOREST PLYWOOD SALES

01-28-2013, 03:22 PM	#146
Baja Dad Beastly Adventurer Joined: Jan 2011 Location: Norco California Oddometer: 1,219	Here are a few pics: __________________ Thanks for the 2013 support:GPR Stablizers,Seat Concepts,Kriega.us, Precision Concepts, Acerbis, AME Grips,Rally Raid UK TLD, Klim,Oakley, Sidi-Motonation, Dunlop,ZLT Three Brothers Racing KTM,Multitool FOREST PLYWOOD SALES

01-28-2013, 03:52 PM	#147
dirty_sanchez Dirty_Sanchez Joined: May 2006 Location: Louisiana, Baton Rouge Oddometer: 2,096	Daddyo- Is the fuel crossover line connected to the lower front lobes, then fed to the rear tank? Was it a fairly straightforward install? Looking sharp! Dirty __________________ No, really, the mustache means I love you. '09 KTM 250SXF for Sale, take a look: http://advrider.com/forums/showthrea...7#post21410167

01-27-2013, 09:05 AM	#138
nibby Gnarly Adventurer Joined: Feb 2009 Location: U.K. Oddometer: 101	Do you know the total weight of Evo2 kit with screen/headlight/tanks, basically everything without the nav unit? Think it's the Adventure Kit? Also with the low fender. Looking for the total difference in weight when fitted compared to standard. cheers

01-27-2013, 10:59 AM	#140
nibby Gnarly Adventurer Joined: Feb 2009 Location: U.K. Oddometer: 101	Good stuff, Cheers. So less than 10kg for the lot, impressive.

01-27-2013, 07:26 PM	#142
xplor cougar bait Joined: Dec 2006 Location: Front Ranger for now Oddometer: 213	looking forward to the pics

01-28-2013, 04:24 PM	#149
Assfault Exposed Member Joined: Sep 2007 Location: RockyMountains Oddometer: 1,451	Yea! I received notice my tank kit was enroute. I going a bit different and melding a traditional fairing to the EVO2 tanks. I have the fairing bracket and the rest of the pieces to put it all together. I gonna be like a kid in a candy store here soon. Sent from my iPad using Tapatalk HD __________________ * Assfault, Ass-Fault, Ms Ass, thier neighbors or friends, are not responsible for any incidents, accidents, or accusations, that might result from you using this forum in the pursuit of adventure greatness. Avoid taking ADV before bed time. Do not use if you experince faintness, dizzniess, inversness, difficulty urinating or an erection lasting longer than 4 hours. Thank you*

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode