|01-29-2013, 06:57 AM||#12|
Joined: Sep 2008
Location: backwoods Alabama
Oh noes, Paul...
I'm with HWG on this-- a faint coat of silcone sealant both sides. Belt-and-suspenders-- may not be absolutely necessary, but it doesn't hurt. And the silly-cone serves as a release compound-- the old gasket peels off with no scraping or cussing.
Tighten the oilpan bolts with a short 3" 'palm ratchet', tighten x-pattern starting in the middle and working outwards. Recheck after a couple of heating-cooling cycles.
Of courser, YMMV. Ride safe and keep the shiny side up.
'73 R60/5 Toaster
Luddite. Not just a philosophy, a way of life...
|Thread Tools||Search this Thread|