KTM forks on your Airhead! Group Buy Two - Page 4

hardwaregrrl · 01-23-2013, 08:32 PM

If be down for a sub mount and tower pin group buy. Maybe even with the damper!

Ras Thurlo · 01-24-2013, 07:05 AM

Quote:

Originally Posted by hardwaregrrl

If be down for a sub mount and tower pin group buy. Maybe even with the damper!

do we have pricing for sub mount/tower and damper?

I think I would in for these too if pricing ok

Clay Spinner · 01-24-2013, 07:40 AM

That makes three for the damper and 'bits'. Heck... I'd go in as well to make it an even number. If nothing else... at least the hardware!

mendoje · 01-25-2013, 04:30 AM

To clarify on the parts needed for a Scotts damper installation:

1) BRP Sub Mount:
http://www.advrider.com/forums/showp...6&postcount=45

2) Guy's Tower Pin Bracket: This is only the bracket that holds the tower pin. He's already spread thin with many projects, so we need confirmation that Guy can take this on too.

3) Scotts Damper and 4) Tower Pin

For me, I already have a Scotts Damper and Tower Pin, and the BRP Sub Mount is just a phone call away. The harder part is Guy's Bracket for the tower pin.

Thanks!
Jeff

Clay Spinner · 01-26-2013, 02:32 AM

Mendoje...

Agreed, I am happy to find a damper... its guy's mount that if of interest... two of them actually.

HPMGuy · 01-27-2013, 10:24 AM

I'd be happy to make the pin towers for the damper setup, I'm out of stock on the shelf so I need to make some anyhow.

If we could get a list of who is interested in the SUB mount and damper I could get a quote for that as well. Don't know how competitive I will be, but could give it a go. Many sellers seem to find a way around Scotts minimum pricing without getting dumped as a dealer.

Clay Spinner · 01-27-2013, 12:31 PM

Quote:

Originally Posted by HPMGuy

I'd be happy to make the pin towers for the damper setup.

If we could get a list of who is interested in the SUB mount and damper I could get a quote for that as well.

Those who are interested can find a link to a previous example HERE. As various people have expressed interest in the fitting bits with and without the actual damper, if peeps could clarify what they may be after it should help hpmguy be more precise in what he needs to do/buy/make etc etc.

You can reply via pm to see and I'll compile another list.

Thanks.

Clay Spinner · 02-01-2013, 01:36 PM

I have not heard anything back this week from the two remaining peeps. I'm going to assume everyone who is interested and can go forward (ready to pony up) has done so. The final list is as follows (please let me know if I'v made a mistake)

Updated 01.02.13.

Cofirmed with intent to purchase as follows:

For the Extreme 50mm (Conventional)

1. GESII (with stem pressed)
2. Mendjoe (49mm is possible?... with stem pressed)
3.CDubs (with stem pressed)
4. Ras Thurlo (with stem pressed)
5. Ras Thurlo (no stem, but anodized)

For the 4860's (USD)

1. Beater (has a stem and would like it pressed)
2. Clay Spinner (with stem pressed)
3. Clay Spinner (with stem pressed)
4. Chadleys1 (longer stem from a 950 adv if possible))
5. Castironmeyer (with stem pressed)
6. philgunn (with stem pressed)
7. Andy frizzle (with stem and lowers for 43s)
8. Andyfrizzle (with stem and lowers for 43s)
9. Ras THurlo (no stem, but anodized)

Stabilizer and hardware - just waiting on prices before committing.

1. Mendoje
2. Hardwaregrrl
3. Ras Thurlo (X2 setups potentially))
4. Clay Spinner (X2 setups potentially)

HPMGuy · 02-06-2013, 11:07 AM

Sent everyone a PM with deposit instructions. If for some reason you were left out, let me know.

Looking forward to getting this project rolling!

Castironmeyer · 02-10-2013, 08:14 AM

Do to un forseen issue with my truck I must back out of this order I am sorry and trully regret not being able to order but truck has to be first priorty

Castironmeyer · 02-10-2013, 08:35 AM

Cant get a pic to show but here is a link to my truck http://castironmeyer.smugmug.com/Oth...dwnjF&lb=1&s=M

LocuL · 02-10-2013, 09:29 AM

hardwaregrrl · 02-10-2013, 02:04 PM

PM sent.....and

WTF....sorry about the truck. That's insane...what happened???

Castironmeyer · 02-10-2013, 07:15 PM

It had an electric short as much as I can tell. It happened Superbowl Sunday about 20 minutes before the game. My liability insurance won't cover it so oh well.

Do not see a pm

HPMGuy · 03-06-2013, 09:33 AM

Ok, so we lost a few people...and then we gained a couple new ones as well, so the quantities ended up close to where we started. I am still awaiting a few stragglers with their deposits, but am ordering the material for this project tomorrow anyhow. As soon as I get all of the promised deposits in hand, I will order the stems and hardware.

The material is a small part of a large order that will be coming by truck, so will be at least a week for delivery here. I will update you all when I start work on them.

I will be making enough pin towers for all who need them for the Scotts installation.

01-23-2013, 08:32 PM	#46
hardwaregrrl Shit for brains Joined: Jan 2006 Location: Atlanta Oddometer: 4,863	If be down for a sub mount and tower pin group buy. Maybe even with the damper! __________________ Trans Lab RR-broke down in Ontario-2 stroke fun for 200 bucks- TCAT R100 GS racks For Sale My life aboard an R80ST

01-24-2013, 07:40 AM	#48
Clay Spinner Woodfire or Bust Joined: Nov 2008 Location: Dartmoor, UK Oddometer: 398	That makes three for the damper and 'bits'. Heck... I'd go in as well to make it an even number. If nothing else... at least the hardware! Clay Spinner screwed with this post 01-24-2013 at 01:35 PM

01-25-2013, 04:30 AM	#49
mendoje Gnarly Adventurer Joined: Jun 2009 Location: Los Angeles Oddometer: 134	To clarify on the parts needed for a Scotts damper installation: 1) BRP Sub Mount: http://www.advrider.com/forums/showp...6&postcount=45 2) Guy's Tower Pin Bracket: This is only the bracket that holds the tower pin. He's already spread thin with many projects, so we need confirmation that Guy can take this on too. 3) Scotts Damper and 4) Tower Pin For me, I already have a Scotts Damper and Tower Pin, and the BRP Sub Mount is just a phone call away. The harder part is Guy's Bracket for the tower pin. Thanks! Jeff __________________ 2004 BMW R1100S / 2003 Ducati M800Sie / 1986 R80 G/S / 1981 BMW R100RS (Sold ) / 1977 Kawasaki KE100 (1st Bike )

02-06-2013, 11:07 AM	#54
HPMGuy ^OP Gnarly Adventurer Joined: Mar 2006 Location: Mid-California Oddometer: 241	Deposit info PM. Sent everyone a PM with deposit instructions. If for some reason you were left out, let me know. Looking forward to getting this project rolling!

02-10-2013, 08:14 AM	#55
Castironmeyer Adventurer Joined: Oct 2008 Location: Indiana Oddometer: 58	Do to un forseen issue with my truck I must back out of this order I am sorry and trully regret not being able to order but truck has to be first priorty __________________ '83 BMW R80 ST/PD SCRAMBLER '62 VESPA 160 GS MK1

01-26-2013, 02:32 AM	#50
Clay Spinner Woodfire or Bust Joined: Nov 2008 Location: Dartmoor, UK Oddometer: 398	Mendoje... Agreed, I am happy to find a damper... its guy's mount that if of interest... two of them actually.

01-27-2013, 10:24 AM	#51
HPMGuy ^OP Gnarly Adventurer Joined: Mar 2006 Location: Mid-California Oddometer: 241	I'd be happy to make the pin towers for the damper setup, I'm out of stock on the shelf so I need to make some anyhow. If we could get a list of who is interested in the SUB mount and damper I could get a quote for that as well. Don't know how competitive I will be, but could give it a go. Many sellers seem to find a way around Scotts minimum pricing without getting dumped as a dealer.

02-01-2013, 01:36 PM	#53
Clay Spinner Woodfire or Bust Joined: Nov 2008 Location: Dartmoor, UK Oddometer: 398	I have not heard anything back this week from the two remaining peeps. I'm going to assume everyone who is interested and can go forward (ready to pony up) has done so. The final list is as follows (please let me know if I'v made a mistake) Updated 01.02.13. Cofirmed with intent to purchase as follows: For the Extreme 50mm (Conventional) 1. GESII (with stem pressed) 2. Mendjoe (49mm is possible?... with stem pressed) 3.CDubs (with stem pressed) 4. Ras Thurlo (with stem pressed) 5. Ras Thurlo (no stem, but anodized) For the 4860's (USD) 1. Beater (has a stem and would like it pressed) 2. Clay Spinner (with stem pressed) 3. Clay Spinner (with stem pressed) 4. Chadleys1 (longer stem from a 950 adv if possible)) 5. Castironmeyer (with stem pressed) 6. philgunn (with stem pressed) 7. Andy frizzle (with stem and lowers for 43s) 8. Andyfrizzle (with stem and lowers for 43s) 9. Ras THurlo (no stem, but anodized) Stabilizer and hardware - just waiting on prices before committing. 1. Mendoje 2. Hardwaregrrl 3. Ras Thurlo (X2 setups potentially)) 4. Clay Spinner (X2 setups potentially)

02-10-2013, 08:35 AM	#56
Castironmeyer Adventurer Joined: Oct 2008 Location: Indiana Oddometer: 58	Cant get a pic to show but here is a link to my truck http://castironmeyer.smugmug.com/Oth...dwnjF&lb=1&s=M __________________ '83 BMW R80 ST/PD SCRAMBLER '62 VESPA 160 GS MK1

02-10-2013, 09:29 AM	#57
LocuL Gnarly Infantry Joined: Dec 2006 Location: Denmark - Jutland Oddometer: 882	__________________ KTM 950(1190) Adv-s, Soon to be Project 1190 KTM 530 EXC-R 08

02-10-2013, 02:04 PM	#58
hardwaregrrl Shit for brains Joined: Jan 2006 Location: Atlanta Oddometer: 4,863	PM sent.....and WTF....sorry about the truck. That's insane...what happened??? __________________ Trans Lab RR-broke down in Ontario-2 stroke fun for 200 bucks- TCAT R100 GS racks For Sale My life aboard an R80ST

02-10-2013, 07:15 PM	#59
Castironmeyer Adventurer Joined: Oct 2008 Location: Indiana Oddometer: 58	It had an electric short as much as I can tell. It happened Superbowl Sunday about 20 minutes before the game. My liability insurance won't cover it so oh well. Do not see a pm __________________ '83 BMW R80 ST/PD SCRAMBLER '62 VESPA 160 GS MK1

03-06-2013, 09:33 AM	#60
HPMGuy ^OP Gnarly Adventurer Joined: Mar 2006 Location: Mid-California Oddometer: 241	Go time.... Ok, so we lost a few people...and then we gained a couple new ones as well, so the quantities ended up close to where we started. I am still awaiting a few stragglers with their deposits, but am ordering the material for this project tomorrow anyhow. As soon as I get all of the promised deposits in hand, I will order the stems and hardware. The material is a small part of a large order that will be coming by truck, so will be at least a week for delivery here. I will update you all when I start work on them. I will be making enough pin towers for all who need them for the Scotts installation.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode