|02-06-2013, 02:22 PM||#16|
Joined: Nov 2005
Location: Laurel, MD
I think you can get them cheaper from motobins. http://www.motobins.co.uk/bmw-parts....20valve%20Twin I don't know why they are cheaper from England but they are.
That's where I got my exhaust for my R100GS and I live a few miles away from Bob's.
|02-08-2013, 09:43 AM||#17|
So much to ponder
Joined: Jun 2007
Location: oc, ca
If you decide to keep your existing pipes and want to replace the crossover, here is a note supplied by inmate xactley on the Tips and Trick thread:
I replaced the cross over pipe on my R75/5 with a $10 plumbing extension pipe found in the under-sink aisle.
They are 12 inches long, brass inside, chrome outside, 1 1/4 inches in diameter..
I ground the threaded section off of both ends of the extension, never-seized the header and slid them on.
Slide it on further than the original, right up to the welds.
No clamps needed.
Originally Posted by DR. Rock
once you leave the pavement, it's like entering a parallel universe... a wormhole in both space and time... sometimes you won't believe you're still in the United States, or in this century.
|Thread Tools||Search this Thread|