Pensacola area riders - Page 1523

waysherr · 02-09-2013, 06:52 AM

[QUOTE-start with fresh compression.[/QUOTE]

So true! With no valve train to breathe through, ring seal is EVERYTHING to a 2stroke. If you pull the jug off, put the ring in it and measure end gap. .003 per inch of bore is a good rule of thumb, I bet yours is fat.....

motomike14 · 02-09-2013, 07:27 AM

Quote:

Originally Posted by waysherr

No need for wire brush, contact cleaner, & elbow grease. Bring me your power valve parts & I will bead blast them at work for free. You will think they are brand new from the nearest dealer

This applies to any ADV member.....bead blasting, welding, etc. I can help, ask Skidmark

Can you brazen small holes on something like a dampner rod? I want to fix the front end on my XR but can't do a whole lot till I make that fix first.

Vico1 · 02-09-2013, 07:45 AM

Gonna head out to Karick Lake and meet up with the Bama boys....

See you all tomorrow...

Moabman · 02-09-2013, 04:16 PM

Quote:

Originally Posted by Vico1

Gonna head out to Karick Lake and meet up with the Bama boys....

See you all tomorrow...

Are the fast burners meeting at Blackwater or Karick Lake? Time?

motomike14 · 02-09-2013, 04:34 PM

Quote:

Originally Posted by Moabman

Are the fast burners meeting at Blackwater or Karick Lake? Time?

Ride leaves from karick lake at 9am.

rotorhead511 · 02-09-2013, 04:34 PM

Karick Lake with a 0900 rollout.

Quote:

Originally Posted by Moabman

Are the fast burners meeting at Blackwater or Karick Lake? Time?

MItrnsplnt · 02-09-2013, 04:34 PM

Quote:

Originally Posted by Moabman

Are the fast burners meeting at Blackwater or Karick Lake? Time?

FASTBURNERS unite!!!! Karick lake @ 0900 Sunday a.m.!!!!!

rotorhead511 · 02-09-2013, 04:36 PM

That's CRAZY. The three of us hit the submit button at exactly the same time. Check the time stamps.

Moabman · 02-09-2013, 04:42 PM

Quote:

Originally Posted by MItrnsplnt

FASTBURNERS unite!!!! Karick lake @ 0900 Sunday a.m.!!!!!

See you there.........

Woods Rider · 02-09-2013, 04:56 PM

New brakes front and rear, new front tire and fresh oil made my morning constructive. Afterwards, Spectre and I headed towards Timber Lake for a shake down ride. The sand was the pristine and sticky you get after a hard rain!

Saw a couple guys riding on Ranger Camp Road not sure who they were.

Great day!

Y'all have fun at Blackwater tomorrow and keep Vic outta da mud!

Hatch · 02-09-2013, 05:24 PM

Quote:

Originally Posted by waysherr

No need for wire brush, contact cleaner, & elbow grease. Bring me your power valve parts & I will bead blast them at work for free. You will think they are brand new from the nearest dealer

This applies to any ADV member.....bead blasting, welding, etc. I can help, ask Skidmark

now that is a generous offer! Thanks man! I'll shoot a pm your way once I get to that point. ADV baby

speaking of welding - how about aluminum?

oh and

to the ADVers I saw out today. great day for an Eglin burn, great day for some riding!

waysherr · 02-09-2013, 08:57 PM

Quote:

Originally Posted by Hatch

speaking of welding - how about aluminum?

No problem

waysherr · 02-09-2013, 09:04 PM

Quote:

Originally Posted by motomike14

Can you brazen small holes on something like a dampner rod?

Sure, but you really should get some Emulators ( Race Tech) from Bob at R&R. They are reasonably priced & worlds better than damper rod mods!! I have them on my P.V. YZ's (465 & 250)...they are great

Vico1 · 02-10-2013, 05:15 AM

Rode 25 miles with Hooknup and friends then 35 with the app man most excellent day. Ready for more today.

motomike14 · 02-10-2013, 05:53 AM

Can't make it this weekend; got some work to take care of before the week. Have fun guys. Hope to make it in a month or so.

02-09-2013, 06:52 AM	#22831
waysherr Behind Bars For Life Joined: May 2012 Location: P'cola Oddometer: 117	[QUOTE-start with fresh compression.[/QUOTE] So true! With no valve train to breathe through, ring seal is EVERYTHING to a 2stroke. If you pull the jug off, put the ring in it and measure end gap. .003 per inch of bore is a good rule of thumb, I bet yours is fat..... __________________ Nobody said life would be easy, they just promised it would be worth the ride.

02-09-2013, 07:45 AM	#22833
Vico1 Takin' it Easy Joined: Oct 2008 Location: Ft Walton Beach FL Oddometer: 4,270	Gonna head out to Karick Lake and meet up with the Bama boys.... See you all tomorrow... __________________ KTM 500 EXC Yellow Vee. A few others in the past You dont quit riding when you get old, you get old when you quit riding. I don't always ride street bikes, but when I do I prefer VStroms

02-09-2013, 04:36 PM	#22838
rotorhead511 Gnarly Adventurer Joined: Nov 2011 Location: Milton, Fl Oddometer: 261	That's CRAZY. The three of us hit the submit button at exactly the same time. Check the time stamps. __________________ '08 450 EXC-R '04 GasGas TXT Pro 280

02-09-2013, 04:56 PM	#22840
Woods Rider X-Crazed Racing Fool Joined: Nov 2009 Location: Navarre, FL Oddometer: 1,711	84 Miles of Pristine Eglin Sand New brakes front and rear, new front tire and fresh oil made my morning constructive. Afterwards, Spectre and I headed towards Timber Lake for a shake down ride. The sand was the pristine and sticky you get after a hard rain! Saw a couple guys riding on Ranger Camp Road not sure who they were. Great day! Y'all have fun at Blackwater tomorrow and keep Vic outta da mud! __________________ 2009 530 EXC - Dualsport Rocket Ship 2004 DL1000 VStrom - For the road Only a motorcycle rider knows why a dog sticks his head out the window of a car! Woods Rider screwed with this post 02-09-2013 at 05:02 PM

02-10-2013, 05:15 AM	#22844
Vico1 Takin' it Easy Joined: Oct 2008 Location: Ft Walton Beach FL Oddometer: 4,270	Two rides yesterday Rode 25 miles with Hooknup and friends then 35 with the app man most excellent day. Ready for more today. __________________ KTM 500 EXC Yellow Vee. A few others in the past You dont quit riding when you get old, you get old when you quit riding. I don't always ride street bikes, but when I do I prefer VStroms

02-10-2013, 05:53 AM	#22845
motomike14 Thumper Crusader Joined: Jan 2010 Location: Florida Oddometer: 1,052	Can't make it this weekend; got some work to take care of before the week. Have fun guys. Hope to make it in a month or so. __________________ "Living just to keep going, goin' just to be sane." - The Black Keys I prefer kick starters, air-cooling, and carburetors over anything.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode